my control arm story - Bimmerfest - BMW Forums

Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 3 Series & 4 Series > E30 (1982 - 1993)

E30 (1982 - 1993)
God's Chariot. The E30 was produced primarily from 1982 through 1991. The cabriolet was the one exception which was produced through 1993.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-08-2008, 08:13 PM
downhiller's Avatar
downhiller downhiller is offline
livin large
Location: des moines
Join Date: Oct 2007
Posts: 7,560
Mein Auto: 2012 hypermotard 796
my control arm story

so today i took on the challenge of swapping control arms. i had the pelican parts procedure memorized so the job would go a tid bit faster. so i start tearing into things, it took more time to find an impact then it did to take everything but the upper ball joint nut off.

so im running throu everything in my head remembering what pelican said. lower vehical an get from top. upon lowering the car and trying to get the nut from the top i ran into a small problem, the exhaust manifold was in the way.

i didnt want to remove the manifld, because i know the gasket is bad and dont want to make it worse and no one in this town had one. so i get the car back in the air and try everything else possible. that wasnt gunna happen. at this time im pissed off, busted a knucle on the exhaust, and they were goin to close the shop in 30 minutes. so im at the point, attempt the remove manifold and finish it, or put it back together and have a shop do it.

i decided to put it back together and have someone else do it. my main resoning, i looked on the drivers side to see how hard that was gunna be. yea i can do it, but i dont want to think of how im goin to get an impact in there and remove that nut.

so im depressed that i couldnt finish something i started and the fact im goin to take it somewhere to have it worked on.
I know a lot about cars. I can look at a car's headlights and tell you exactly which way it's coming
Reply With Quote

See More Related BMW Stories

Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 3 Series & 4 Series > E30 (1982 - 1993)
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -7. The time now is 10:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001- VerticalScope Inc. All rights reserved.