Z3 passenger seat moves.

Can you please sent me the PPT presentation as well. Thanks
va902b@hotmail.com

Sent

Originally Posted by EOD Guy

Yes,
PM with your email address, I'll send you a detailed power point slide show on how I fixed it.

Could you send the ppt to tom-conroy@strategicre.com?

EOD if its not too much trouble could you please email me the power point as well?

mdolmat@gmail.com

One more request for the PPT. Pleae send to mshamilton@hotmail.com Much appreciated!

I just bought a 1997 Z3 and I'm having the same passenger seat problem. Can someone please send me the Powerpoint to trheiner@msn.com. Thanks.

Can you e-mail it to me as well? I have the same problem!

pj_tobillo@yahoo.com

TIA!

Sent both of you a copy, good luck

can i also get that ppt please? this is the first of many many questions, i just got hold of a z3 and the engine is ok but the interior is a shambles!

Originally Posted by rbellinge

can i also get that ppt please? this is the first of many many questions, i just got hold of a z3 and the engine is ok but the interior is a shambles!

For the rest of those questions, might I suggest, Esmerelda's Fixit Page?

The link from WileECoyote is great, I use this for many repairs. If you still want the power point, I will send but you need to give me your e-mail.

whoops! rbellinge@hotmail.com

will look over the link now, thanks guys!

Alexcarlos1989@me.com

Same Rocky seat issue.

Thanks

Originally Posted by EOD Guy

Yes,
PM with your email address, I'll send you a detailed power point slide show on how I fixed it.

Thank you! sadegrenier@aol.com

Can I get a coy of them thank you.

dsaenz1972@gmail.com

Hi this is my first post, so hopefully someone can assist. I recently bought a 2001 3Lt Z3, and it is the first BMW I have ever owned. It is fantastic and I love it. However it has developed two problems during the short time I have owned it.

1. The drivers seat will not rise or lower. It travells forward and back ok and I can hear the motor attempting to work each time I try to rise and lower it but it doesn't work. Problem is I am 6'4" and my wife raised the seat to its maximum height when she used it, and as a reuslt I can't comfortably fit in the car when the roof is on. Even with the roof off my head sticks up above the windscreen.

2. The fuel guage stopped working the second time I filled up the tank. I believe I may have over fill the tank, which has reuslted in the fuel guage low fuel light staying on and the guage not working - permanently recording no fuel. I tried to fix it by disconecting the battery, however this didn't work.

Any assistance would be greatly appreciated.

Not a good way to start on a forum by posting the same thing in multiple threads.

ONCE is enough.

Welcome.

The fuel gauge is a common problem, and a quick search will get you a lot of information.

PM sent, Please send your power point to jburkhardt@zoointernet.net , thanks

Where do you get the seat bushings from Doug Whalen. Also would like to have the instructions for installing the bushings

Originally Posted by Steamer

The link from WileECoyote is great, I use this for many repairs. If you still want the power point, I will send but you need to give me your e-mail.

Hopefully this thread works. Just wondering if you could send me the power point re seat repairs etc also. Email - bronson07@optusnet.com.au
Thanks
Moondog7

Hey. I'm not having much luck with the site, I think I just sent myself a message. Anyway just wondering if you could send me the link or power point for the seat repairs. Bronson007@optusnet.com.au

Thanks

Moondog7

Originally Posted by plracing

Where do you get the seat bushings from Doug Whalen. Also would like to have the instructions for installing the bushings

Roadstersolutions.com sells them.....

Originally Posted by plracing

Where do you get the seat bushings from Doug Whalen. Also would like to have the instructions for installing the bushings

Here is Doug's site link:

http://www.whalenshiftmachine.com/in...e65007338f52c0

Thanks for that.

Moondog.

My names is John Wolski, and I have a 1998 z3.

Could I get a copy of the PPT on seat bushing replacement...


jwolski@ec.rr.com


thanks a million!