Site Sponsors & Bimmerfest Group Buys
Looking to get some great BMW parts for your car? Get the latest info on sponsor group buys, new products or simply ask a site sponsor a question here!
||Thread Tools||Display Modes|
eas | Macht Schnell 3" ThermalCoated N54 Catless Track Downpipes *IN STOCK*
Applications which require a significant surface temperature reduction as a result of high temperature heat soak will benefit from ThermalCoating. Designed to operate in temperatures up to 2100° F, and meet 3000+ hours of a standard ASTM B 117 salt spray testing, this process will protect the substrate from thermal fatigue and oxidation as well as oxidation scaling while reducing skin temperatures by as much as 54%. ThermalCoating meets U.S. military specification MIL-C-81751B for metallic-ceramic coatings, including FAA approval.
With a maximum output of 306 hp from 2,979 cc the 135/335's N54 powerplant ensures exceptional driving dynamics at all times with all the power of a much larger normal-aspiration engine. Twin turbochargers each forcing compressed air into three cylinders ensure a standard of spontaneity never seen before in a turbocharged power unit. The big advantage of these relatively small turbochargers is their low inertia, avoiding excessive "turbo gap" – the moment which usually passes by until the turbocharger builds up its boost – typical of a conventional turbocharged engine. On the road, therefore, the turbocharged power unit of N54 variant offers all the power and performance of a much larger normally-aspirated engine.
Stock downpipes cause a major restriction in exhaust flow coupled with their small 57mm (2.25***8243 pipe diameter and numerous crush-bends with factory pre-cats squeezed in engine compartment. This results in excessive backpressure and excessive heat, which ultimately affects overall performance at all RPM loads.
Macht Schnell's 76.2mm (3.00***8243 N54 Catless Track Downpipes allow instantaneous turbo spooling and ultra-low backpressure proving significant hp/tq gains that can be felt immediately after installation.
Mandrel-bent T304 Stainless Steel tubing is used to ensure constant exhaust flow is achieved by eliminating any restrictions, resulting in maximum gains and noticeable sound during turbo spooling. TIG-welded construction and Stainless Steel V-Band/catback flanges are durable as well as pleasing to the eyes. Heavy Duty exhaust gaskets and Stainless locking fasteners complete the package.
Stainless O2 sensor bung locations are mounted in the factory locations while introducing additional stainless steel thermocouple bungs for those monitoring EGTs.
- 76.2mm overall diameter, eliminating restrictive factory pre-cats and crush bends
- ThermalCoating reduces surface temperatures by as much as 54%
- Meets U.S. military specification MIL-C-81751B for metallic-ceramic coatings, including FAA approval
- 100% T304 Stainless Steel construction, using mandrel bends
- Precision TIG welded joints
- Heavy-Duty Stainless V-Band/Exhaust flanges
- Heavy-Duty locking fasteners and exhaust gaskets included
- Factory O2 locations retained with Stainless Steel bungs
- Pre-installed Stainless EGT bungs for easy thermocouple mounting
- Reduced underhood temperatures
2007+ 335i (not for xi models)
Dyno of Macht Schnell 3" catless downpipes vs popular 2.5" catless downpipes
Macht Schnell - 76.2mm (3.00") ThermalCoated Catless Track Downpipes for N54 Variants
You can reach us directly by calling 866.669.0705 to place your order over the phone.
Credit/Debit Cards: Visa, Mastercard, Discover, PayPal, Google Checkout (available online & over phone)
Money Order/Cashier's Check & Bank Wire Transfer are also available. Please contact us to pay with either of these methods.
All CA customers will be charged 7.75% CA Sales tax.
All orders will be shipping via UPS. If you are interested in shipping to Hawaii, Alaska, or internationally, please contact us directly, as you will be charged additional shipping fees.
Hours of Operations:
Monday - Friday from 9AM to 5PM PST
Saturday/Sunday - Closed
Retail Location/ Installation Center:
Come check out our 8000 square foot facility in Anaheim, CA. We install everything we sell.
Feel free to contact me via PM, email, or phone if you have any questions.
Last edited by eas; 12-05-2011 at 09:37 AM.
|See More Related BMW Stories|
|Today's Posts Search|