|
|
||||||
|
E28 (1982 - 1988)
|
|
|
Thread Tools | Display Modes |
|
#1
02-19-2012, 10:14 PM
|
|||
|
|||
|
DIY brake booster re-build with new o-rings
For the following cars 533,535,m535,m5,633,635,m635,m6,735.
This Do It Yourself (DIY) is to re-build the Brake Servo Booster #34331156925 It includes a step by step procedure to repair the internal rubber seal and 5 o-rings. I just up dated this post DIY, I have added a new shaft seal and a how to replace the seal. Read the captions at the bottom of each photo. https://picasaweb.google.com/1135658...nZ_Z7f6JrUyQE# This repair needs to have the booster removed from the car. Tools needed: Dremal, vise, bench grinder, battery drill motor with reverse, 1-1/8 inch deep socket, 13mm 1/4 in drive socket with an extension into the drill motor, blade screw driver, 10mm drill bit or 3/8 inch metal drill bit, electric drill motor with 3/8 chuck.
__________________
 Jay 87 M6 https://picasaweb.google.com/1135658...X_js7i1IyIgAE# DIY Booster repair https://picasaweb.google.com/1135658...nZ_Z7f6JrUyQE# 
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
