Here are logic 7 repair instructions for every 1

OK I AM NoT TAKING ANY CREDIT FOR THIS .
I FOUND IT WHILE READING ON A GERMAN FORUM .

HERE IS A COPY & PASTE OF THERE INSTRUCTIONS WITH PIC'S
DO AT YOUR OWN RISK !!!


Repair instructions and ASK Logik7 from the E65!
Good day,

as you all know I am going to repair a defective Logik7.
I just wanted to show my work and presentieren because of the many questions that I'm not yet as far : Thumbsup:
Come rare in the hobby room at my in-laws.

Picture # 1: Here's the Logik7 board, you see four stages
1x Center speaker
1x both rear doors
1x bass left
1x bass right
Picture # 2: I've removed the old broken amplifiers and exposed contacts.
Image No. 3: The same close-up
Picture # 4: These two stages are to replace the old
Picture # 5: I was looking something Sprittig ;-)) do not have hands trembled, but I did not want to hide from you!

I
I also soldered the amp already part way to the board (or
no photo), for the speakers I have 0.5 mm ² thick and 3cm long lines used for
the signals of the thin black? mm ².

Will keep you here with that Fred up to date.

mfg odd ....

Edit of 19/03/2012: As I already wrote yesterday, I was
sprittig something and so I said instead of 0.5mm ², 1.5mm ² to
the TDA soldered ;-( (Now I know why it was so hard * LOL *

This will, of course, correct and add new pictures!