F10 HUD Turn Signals

Originally Posted by digital

Mine is F10 2013 with the new Nav. I'll keep you posted.

Good deal. Thanks.

Here it is:

1- Code KOMBI / HUD_PIA_BLINKER = aktiv
2- Code KOMBI / BLINKER_HUD_ENABLE = aktiv
3- Code HU_NBT / HUD_TURNSIGNAL = aktiv

The iDrive check box will not show up, but it works. (I couldn't figure out the check box issue)

Originally Posted by digital

Here it is:

1- Code KOMBI / HUD_PIA_BLINKER = aktiv
2- Code KOMBI / BLINKER_HUD_ENABLE = aktiv
3- Code HU_NBT / HUD_TURNSIGNAL = aktiv

The iDrive check box will not show up, but it works. (I couldn't figure out the check box issue)

Sweet! Maybe you can kind the missing Pia_Default_Tippblinken or equivalent too?

Originally Posted by shawnsheridan

Sweet! Maybe you can kind the missing Pia_Default_Tippblinken or equivalent too?

I'll work on it

Paging @marcosg:

Can you check and tell me if your HUD Turnsignals work with just:

KOMBI / BLINKER_HUD_ENABLE = aktiv
HU_CIC / HUD_TURNSIGNAL = aktiv

Or, if you also have to enable:

KOMBI / HUD_PIA_BLINKER = aktiv

Also, tell me if you have the "Turn indicator" Checkbox in Settings=>Heads-Up Display.

Originally Posted by shawnsheridan

Paging @marcosg:

Can you check and tell me if your HUD Turnsignals work with just:

KOMBI / BLINKER_HUD_ENABLE = aktiv
HU_CIC / HUD_TURNSIGNAL = aktiv

Or, if you also have to enable:

KOMBI / HUD_PIA_BLINKER = aktiv

Also, tell me if you have the "Turn indicator" Checkbox in Settings=>Heads-Up Display.

Yes, HUD Turnsignals work with just

KOMBI / BLINKER_HUD_ENABLE = aktiv
HU_CIC / HUD_TURNSIGNAL = aktiv

I did not code KOMBI / HUD_PIA_BLINKER. It is currently set to inaktiv

Yes, I do have "Turn indicator" Checkbox in Settings=>Heads-Up Display.

Originally Posted by marcosg

Yes, HUD Turnsignals work with just

KOMBI / BLINKER_HUD_ENABLE = aktiv
HU_CIC / HUD_TURNSIGNAL = aktiv

I did not code KOMBI / HUD_PIA_BLINKER. It is currently set to inaktiv

Yes, I do have "Turn indicator" Checkbox in Settings=>Heads-Up Display.

Ok. Interesting. So, a car with HU_CIC updated with 47.x acts the same as it always has, yet cars with HU_NBT apparently need KOMBI / HUD_PIA_BLINKER also enabled to get HUD turn signals, and for some reason, the "Turn indicator" Checkbox does not show up with HU_CIC / HUD_TURNSIGNAL = aktiv.

I couldn't get my 2013 F10 to work either, but will try it with these new settings and will report back.

Originally Posted by digital

Here it is:

1- Code KOMBI / HUD_PIA_BLINKER = aktiv
2- Code KOMBI / BLINKER_HUD_ENABLE = aktiv
3- Code HU_NBT / HUD_TURNSIGNAL = aktiv

The iDrive check box will not show up, but it works. (I couldn't figure out the check box issue)

I was able to get the HUD Turnsignals working on my 2013 F10 also using the KOMBI / HUD_PIA_BLINKER = aktiv setting. I also found that they continue to work even with HU_NBT / HUD_TURNSIGNAL = inaktiv. It looks like the checkbox function maybe similar to the Entertainment/Telephone List where the checkbox just won't work but the HUD still displays them properly?

Adam

Originally Posted by falcongeek

I was able to get the HUD Turnsignals working on my 2013 F10 also using the KOMBI / HUD_PIA_BLINKER = aktiv setting. I also found that they continue to work even with HU_NBT / HUD_TURNSIGNAL = inaktiv. It looks like the checkbox function maybe similar to the Entertainment/Telephone List where the checkbox just won't work but the HUD still displays them properly?

Adam

Your check box shows up though, its just nonfunctional?

Originally Posted by shawnsheridan

I have never coded HUD Turn signals on an F30, so I can't say for sure whether it should work.

Has anyone coded an F30 and got it to work?

I just tried this on my 2012 F30 328i (April build); no joy.

I set:

HU_CIC / 3000 / HUD_TURNSIGNAL to aktiv (Wete=01)
KOMBI / 3003 / HUD_BLINKER_ENABLE to aktiv (Werte=01) F30 function is named this, there is no BLINKER_HUD_ENABLE in KOMBI)
KOMBI / 3008 / HUD_PIA_BLINKER to aktiv (Werte=01)

I get the iDrive turn signal option in the HUD section and I can select it and it's checked, but no HUD signals show up.

I also wanted to code the one-touch from 3 blinks to 5, so I also changed:

FEM / 3064 / PIA_DEFAULT_TIPPBLINKEN to Mehrfachblinken (Werte=01)
FEM / 3060 / BLINKZYKLEN_ANZAHL_TIPP to Werte=04 (value name changes to UNKNOWN)

I now get 5 blinks for one-touch, but still no HUD signals. Any ideas?

It may be one of those settings that takes a while to "take", so I'll see if it works tomorrow...


I-Step is F020-12-07-532

CAFD versions:
HU_CIC is 0F9_007_003_007
KOMBI is 9C8_005_000_030
FEM is 794_004_122_077

If anyone figures out HUD turn signals for F30 2012, please post. Thanks.

Originally Posted by legaleye3000

If anyone figures out HUD turn signals for F30 2012, please post. Thanks.

don't you have the same menu structure as the F10/11?

Originally Posted by 332701

don't you have the same menu structure as the F10/11?

It's almost the same.

HU_CIC / 3000 / HUD_TURNSIGNAL to aktiv (Wete=01)
KOMBI / 3003 / HUD_BLINKER_ENABLE to aktiv (Werte=01) F30 function is named this, there is no BLINKER_HUD_ENABLE in KOMBI)
KOMBI / 3008 / HUD_PIA_BLINKER to aktiv (Werte=01)


I've set all three and get the option in the iDrive HUD list and I can and do select it, but no turn signals show up in the HUD.

I'm not sure, but a couple posts above, he said he was unable to do it.

Originally Posted by falcongeek

I was able to get the HUD Turnsignals working on my 2013 F10 also using the KOMBI / HUD_PIA_BLINKER = aktiv setting. I also found that they continue to work even with HU_NBT / HUD_TURNSIGNAL = inaktiv. It looks like the checkbox function maybe similar to the Entertainment/Telephone List where the checkbox just won't work but the HUD still displays them properly?

Adam

Interesting. Do you get a checkbox? I don't. But they DO work.

Originally Posted by wdimagineer

Interesting. Do you get a checkbox? I don't. But they DO work.

On my F30 (with CIC not NBT) I get the checkbox and it's enabled (I can check and uncheck it), but no turn signals show up in the HUD when checked.

Did you only change the KOMBI / HUD_PIA_BLINKER = aktiv and nothing else to get yours to work? I have not tried that yet. I've also always set HUD_BLINKER_ENABLE to aktiv too.

When I just reset HU_CIC / 3000 / HUD_TURNSIGNAL back to inaktiv (leaving the other 2 changes intact), the check box goes away and no signals in the HUD.

I think the HU_CIC change just enables the checkbox on the screen and the KOMBI change(s) actually enable the function.

Originally Posted by FrogmanF30

On my F30 (with CIC not NBT) I get the checkbox and it's enabled (I can check and uncheck it), but no turn signals show up in the HUD when checked.

Did you only change the KOMBI / HUD_PIA_BLINKER = aktiv and nothing else to get yours to work? I have not tried that yet. I've also always set HUD_BLINKER_ENABLE to aktiv too.

When I just reset HU_CIC / 3000 / HUD_TURNSIGNAL back to inaktiv (leaving the other 2 changes intact), the check box goes away and no signals in the HUD.

I think the HU_CIC change just enables the checkbox on the screen and the KOMBI change(s) actually enable the function.

I checked everything, including in HU_NBT. I get no checkbox, but I do get turn signals in my HUD.

This works perfectly well in a 2011 Australian M-spec 520d.... Nice to use as the turn signal sound is quite soft and can be muffled by music.

Has anyone tried this on the f01?

Coded the signals on my f01;

shows the hud only both sides together or right/right and left/left ?

in my tested F30 i cant get it work

got the Checkbox too but take no effect in hud

Any luck on this. Have an 2013 F30 checkbox shows up but no blinkers in HUD. Have all 3 settings enabled.

Originally Posted by AutobahnCowboy

shows the hud only both sides together or right/right and left/left ?

in my tested F30 i cant get it work

got the Checkbox too but take no effect in hud

Signals are shown to together.

Originally Posted by csnyder335i

Any luck on this. Have an 2013 F30 checkbox shows up but no blinkers in HUD. Have all 3 settings enabled.

No joy on getting this to work on an F30 yet.

I also have all 3 settings activated on my 2012 328i and the check box is operational, just no blinkers in the HUD.