|
|
||||||
|
E46 (1999 - 2006)
The fourth generation 3 Series (E46 chassis) was introduced in 1999 and set the standard for engineering and performance during it's years of production including being named to Car & Driver's 10 best list every one of those years! ! -- View the E46 Wiki |
|
|
Thread Tools | Display Modes |
|
#1
10-02-2012, 02:50 PM
|
|||
|
|||
|
outside ambient temp sensor
ok guys its the bimmer virgin again. i got the inner fender and hardware and ambient temp sensor. i also got the plug that connects to the sensor. my question which is prob a stupid one is what size are the barrel pins that go in the plug. the ends you crimp to the wires? all advance had was 5/32 and i know they were way too big. i figured the plug would come with this pins. i tried to slide the wire in to see if it was the lock type but a no go. thanks again for your patience i am learning but it is my first bimmer
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
