Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > Z Series > E36/7 Z3 (1996-2002)

E36/7 Z3 (1996-2002)
E36/7 Z3 Roadster, Z3 coupe, Z3 M Roadster and Z3 M Coupe talk with our gurus here.

Reply
 
Thread Tools Display Modes
  #1  
Old 10-03-2012, 12:56 PM
woodhull woodhull is offline
Registered User
Location: Sarasota,Fl
 
Join Date: Oct 2012
Posts: 3
Mein Auto: 2001 Z3
CE light/ stalls sometimes immediately after start

I have the CE light on all the time now, it was intermittent. Sometime the car stalls immediately after it starts other times it will be ok in neutral but as soon as I shift into gear it stalls. When I restart it will remain started if I keep it at around 1500 rpms for a minute and then it will be fine. Also sluggish.
Reply With Quote
Ads by Google
  #2  
Old 10-05-2012, 11:46 AM
Benjamin757 Benjamin757 is offline
M52B28
Location: Chesapeake, Va
 
Join Date: May 2012
Posts: 46
Mein Auto: 1998 BMW Z3 2.8
sounds like a classic sign of a worn hardened vanos seal (o-ring) the job is a pain in the @$$ but here is more info. http://www.beisansystems.com/
__________________
What would you attempt
if you knew you
could not
fail?
Reply With Quote
  #3  
Old 10-05-2012, 12:03 PM
Mikey48 Mikey48 is offline
Officially Welcomed to the 'Fest
Location: Charleston,S.C.
 
Join Date: Mar 2011
Posts: 411
Mein Auto: BMW Z4 3.0
I would have the codes pulled and see what is causing the SEL and take it from their. Good luck.
Reply With Quote
  #4  
Old 10-05-2012, 06:30 PM
crewdog843's Avatar
crewdog843 crewdog843 is offline
Officially Welcomed to the 'Fest
Location: Las Vegas, NV
 
Join Date: Mar 2006
Posts: 672
Mein Auto: '08 Z4 3.0si Roadie
There is a BMW mantra which goes somewhat like this: The CEL/SES light is always emissions related, which basically means MAF, cam position sensor, or O2 sensors. Codes should tell you which one. Based on the fact that it was intermittent, and then full on, I would put money on the Cam Position Sensor.
__________________
Reply With Quote
Reply

Bookmarks


Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > Z Series > E36/7 Z3 (1996-2002)
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 11:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms