FS: N54 E90 335i Harman Motive/Vishnu Section 1 + 2 & Welded Magnaflow Mufflers+Tips
Reason for selling: Changing my setup again.
I have the Harman Motive/Vishnu Sections 1 and 2, 2.5" SS Piping that I bought from another member here.
Section 1 flanged: Resonators were deleted and piping was welded in (NON SS).
Section 2 flanged: extending to the rear with welded on Magnaflow #11236 natural SS mufflers with welded on hangers to fit the E90 335i Sedan. The inner hanger on the magnaflow mufflers were cut for easy removal. You will need a muffler shop to spot weld the hanger to the oem bushing. Easy job for them to do since it's all lined up already.
Magnaflow 4" Slanted Polished SS Tips were welded (not pretty looking) to the mufflers (See Photos). You can see the pipe extending out inside the tip if you look up close. Far away you can't tell.
Personally the welds aren't the best but it does it's job. It's under the car so you can't see it anyways. :confused2
Was told the Vishnu pipes were used about 15k miles. The Magnaflow mufflers and tips are used about 100 miles + daily commute until removed.
On to the photos::
Prefer local pick up in the SF Area, really don't want to ship this out (But if needed, can possibly do greyhound).
If you just want the SS mandrel bent Vishnu pipes from DP to cut muffler section, then I can sell just the piping for $285. Or get everything for $350 pick up.
Any questions, please feel free to ask. Thanks for looking.
Last edited by t3t5; 10-19-2012 at 06:52 PM.