|
|
||||||
|
Forced Induction
Aftermarket superchargers & turbos as well as tuning for stock BMW turbos (N54 motor - 135i / 335i / 535i). Force-fed discussion to make your car go faster |
|
|
|
Thread Tools | Display Modes |
|
#1
10-17-2012, 07:13 PM
|
|||
|
|||
|
Turbo M20B25
What's the best turbo setup for this motor that can be put on a bone stock engine?
|
|
#2
12-11-2012, 05:26 PM
|
|||
|
|||
|
I have an E34 with an M20B25 motor. Unfortunately as far as I can see they aren't really fit for any kind of aggressive forced induction. You could build some kind of ram air intake though. Post pics if you do build something!
__________________
Year: 1990 Model: 525i Transmission: 5 speed Mileage: 250k
|
|
#3
12-18-2012, 09:12 AM
|
||||
|
||||
|
T-28 from a dsm... or maybe a 16g. The motors have a 8.5:1 compression. I would at the very least buy: MLS headgasket, arp head studs, injectors, and a tune. Otherwise, you'll boost maybe 3-5psi and fuel cut. In that case, don't waste your time.
__________________
1985 335i  Black on Black coupe 5spd Tokico lowering springs, KYB struts and shocks, BavAuto strut bars, SPC adjustable camber plates, Ireland Engineering rear toe and camber kit, Sparco buckets, Rota Torque 16x7 fronts 17x9.5 rear, Hella headlamps with HID conversion, all red taillights, MSD coil,M30B35 swap http://www.bimmerfest.com/forums/sho...36#post7573736 M20B27 for sale in Cincinnati
|
|
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
