Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 7 Series / 8 Series > 7 Series - E65 / E66 (2002 - 2008)

7 Series - E65 / E66 (2002 - 2008)
Discussion pertaining to the flagship BMW here.

Reply
 
Thread Tools Display Modes
  #1  
Old 10-16-2012, 09:40 AM
ayman ayman is offline
Registered User
Location: bahrain
 
Join Date: Jan 2012
Posts: 47
Mein Auto: Alpina B7 e66
BMW Welcome Light for E65 By dashsoft

Dear Friends,

as promised i have read the Full EPD File by DashSoft for DWA Modul which had already the Future of BMW Welcome Light.
Please download the Attached file from below link (make sure to press right click on the link and save as"
http://www.gulfbimmer.com/bimmerfest...929701_c03.epb

& follow the instruction:
Open Dashsoft (2.1)
Select DWA Module
Coding
FIRST THING YOU NEED TO DO IS BACKUP YOUR EPB FILE.
then press Load & Choose the attached EPD file
Press Write & ENJOY THE WELCOME LIGHT.

Very soon i will upload the file for One touch windows up & down. but i need to tested before that.

My regards,

ayman

Last edited by ayman; 10-17-2012 at 12:02 AM.
Reply With Quote
Advertisement
  #2  
Old 10-16-2012, 07:39 PM
wjjklj's Avatar
wjjklj wjjklj is offline
Officially Welcomed to the 'Fest
Location: Louisville, Kentucky USA
 
Join Date: Dec 2008
Posts: 1,587
Mein Auto: 2009 750i
I already have dash soft. What exactly does this coding do?
__________________
Reply With Quote
  #3  
Old 10-16-2012, 07:51 PM
First_745Li's Avatar
First_745Li First_745Li is offline
Officially Welcomed to the 'Fest
Location: South FL
 
Join Date: Jun 2012
Posts: 2,433
Mein Auto: '03 745Li
Welcome lights - the park lights/headlights/fog lights illuminate when you hit the unlock on the FOB. I was told by a couple of members that you need a facelift light module for this to work.
__________________


'11 328i
'07 Audi A8 (w/ 20,000 miles)
'03 745Li (sold)
'03 Acura TL-S
'02 Infiniti QX4 (sold )
Reply With Quote
  #4  
Old 10-16-2012, 08:18 PM
wjjklj's Avatar
wjjklj wjjklj is offline
Officially Welcomed to the 'Fest
Location: Louisville, Kentucky USA
 
Join Date: Dec 2008
Posts: 1,587
Mein Auto: 2009 750i
Mine does this when I hit the light button on my key fob. Not sure why I would want this programming.
__________________
Reply With Quote
  #5  
Old 10-16-2012, 08:29 PM
PAPER's Avatar
PAPER PAPER is online now
CRISP & CLEAN
Location: on the moon
 
Join Date: Jul 2009
Posts: 3,003
Mein Auto: Ford Pinto
Quote:
Originally Posted by ayman View Post
Dear Friends,

as promised i have read the Full EPD File by DashSoft for DWA Modul which had already the Future of BMW Welcome Light.
Please download the Attached file from below link (make sure to press right click in the link and save as"
http://www.gulfbimmer.com/bimmerfest...929701_c03.epb

& follow the instruction:
Open Dashsoft (2.1)
Select DWA Module
Coding
FIRST THING YOU NEED TO DO IS BACKUP YOUR EPB FILE.
then press Load & Choose the attached EPB file
Press Write & ENJOY THE WELCOME LIGHT.

Very soon i will upload the file for One touch windows up & down. but i need to tested before that.

My regards,

ayman
Sorry to inform you , but your method will do more harm then anything .

Not every 1 has the same LCM
So by doing things the way you suggest will not work for all & could possibly damage there LCM module .

Sent from my GT-I9100 using Bimmer App
Reply With Quote
  #6  
Old 10-16-2012, 11:56 PM
ayman ayman is offline
Registered User
Location: bahrain
 
Join Date: Jan 2012
Posts: 47
Mein Auto: Alpina B7 e66
Dear Paper,

its not in LCM its in DWA Module

and all E65 Preface lift use the same HW Module C1. i have try the Worst to load different EDP file from another Module and Guess what its show me that this file is smaller then the original and cannot load it. so its SAFE. i already ask to do backup before load the new EPD file.




Quote:
Originally Posted by PAPER View Post
Sorry to inform you , but your method will do more harm then anything .

Not every 1 has the same LCM
So by doing things the way you suggest will not work for all & could possibly damage there LCM module .

Sent from my GT-I9100 using Bimmer App

Last edited by ayman; 10-16-2012 at 11:57 PM.
Reply With Quote
  #7  
Old 10-17-2012, 12:51 AM
Tanny Tanny is offline
Officially Welcomed to the 'Fest
Location: Australia
 
Join Date: Aug 2012
Posts: 93
Mein Auto: 2008 BMW 530i LCI
ayman, is it possible to set the welcome light so only the parker goes on?
Reply With Quote
  #8  
Old 10-17-2012, 01:53 AM
PAPER's Avatar
PAPER PAPER is online now
CRISP & CLEAN
Location: on the moon
 
Join Date: Jul 2009
Posts: 3,003
Mein Auto: Ford Pinto
Quote:
Originally Posted by ayman View Post
Dear Paper,

its not in LCM its in DWA Module

and all E65 Preface lift use the same HW Module C1. i have try the Worst to load different EDP file from another Module and Guess what its show me that this file is smaller then the original and cannot load it. so its SAFE. i already ask to do backup before load the new EPD file.

Hmmm that's interesting . That your saying
its in the alarm system ( DWA )



I know when using NCS you must go into the LCM A.K.A LMA .

Sent from my GT-N7000 using Bimmer App
Reply With Quote
  #9  
Old 10-17-2012, 02:15 AM
ayman ayman is offline
Registered User
Location: bahrain
 
Join Date: Jan 2012
Posts: 47
Mein Auto: Alpina B7 e66
i think only E3X was the FOB light with the LCM, i have coded some E38 & e39 with BMW scanner 1.4 in LCM.

for e65 because they have the indicator Light with Beeb sound i think that's why they are in DWA module.

Quote:
Originally Posted by PAPER View Post
Hmmm that's interesting . That your saying
its in the alarm system ( DWA )



I know when using NCS you must go into the LCM A.K.A LMA .

Sent from my GT-N7000 using Bimmer App

Last edited by ayman; 10-17-2012 at 02:16 AM.
Reply With Quote
  #10  
Old 10-17-2012, 06:36 AM
First_745Li's Avatar
First_745Li First_745Li is offline
Officially Welcomed to the 'Fest
Location: South FL
 
Join Date: Jun 2012
Posts: 2,433
Mein Auto: '03 745Li
Quote:
Originally Posted by PAPER View Post
Hmmm that's interesting . That your saying
its in the alarm system ( DWA )



I know when using NCS you must go into the LCM A.K.A LMA .

Sent from my GT-N7000 using Bimmer App
LMA is where I tried to code this feature and couldn't with NCS.
__________________


'11 328i
'07 Audi A8 (w/ 20,000 miles)
'03 745Li (sold)
'03 Acura TL-S
'02 Infiniti QX4 (sold )
Reply With Quote
  #11  
Old 10-18-2012, 08:32 AM
RON7165994 RON7165994 is offline
Officially Welcomed to the 'Fest
Location: HOUSTON, TX.
 
Join Date: Apr 2008
Posts: 144
Mein Auto: 2004 745LI
Quote:
Originally Posted by ayman View Post
Dear Friends,

as promised i have read the Full EPD File by DashSoft for DWA Modul which had already the Future of BMW Welcome Light.
Please download the Attached file from below link (make sure to press right click on the link and save as"
http://www.gulfbimmer.com/bimmerfest...929701_c03.epb

& follow the instruction:
Open Dashsoft (2.1)
Select DWA Module
Coding
FIRST THING YOU NEED TO DO IS BACKUP YOUR EPB FILE.
then press Load & Choose the attached EPD file
Press Write & ENJOY THE WELCOME LIGHT.

Very soon i will upload the file for One touch windows up & down. but i need to tested before that.

My regards,

ayman
WHAT YEAR DO'S THIS WORK ON? I JUST DID IT ON MY 2004 745LI AND IT DIDN'T WORK
__________________
Reply With Quote
  #12  
Old 10-18-2012, 09:08 AM
PAPER's Avatar
PAPER PAPER is online now
CRISP & CLEAN
Location: on the moon
 
Join Date: Jul 2009
Posts: 3,003
Mein Auto: Ford Pinto
Quote:
Originally Posted by First_745Li View Post
LMA is where I tried to code this feature and couldn't with NCS.

You need to make sure you have a newer LMA .
I believe Stuart said it should be an LM2 .

Sent from my GT-N7000 using Bimmer App
Reply With Quote
Reply

Bookmarks

Tags
ayman, bahrain, bmw, coding, e65, e66, gulfbimmer, welcome light


Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 7 Series / 8 Series > 7 Series - E65 / E66 (2002 - 2008)
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 11:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms