F07 DVD in Motion - RESOLVED!!

Can someone please provide me with the exact values to enable DVD in Motion?

The various cheat sheets say under module HU_CIC 3000 HMI Speedlock_X_KMH_MAX/MIN the default value is is 3 kmh or 8 kmh, my default value is nicht_aktiv and the default wercht is 00. I right click on wercht, click EDIT, change wercht to FF, and click SAVE.....wercht changes back to 00.

What gives!?

BTW, I am using 47.4 with Esys

After you change to FF you have to hit the save value button on the bottom at the right. Little yellow button. Hit that then the value of FF will be written to the actual script line. After that then save the file, press back and activate FA then code FDL

cnc555ic thanks for the speedy reply. Will try tomorrow and report back!

Sent from my DROID RAZR using Bimmer App

In case you need it, here you will find the detailled instruction:

http://www.bimmerfest.com/forums/sho...d.php?t=624369 / "E-Sys - Getting Started Supplement - Part 2.pdf"

I wasn't aware there was a separate save icon on the lower right hand corner for the wercht. Nevertheless, VIM has been successfully coded thanks to both of you and tonyscv!!!!

But is VIM accessible to all models? Do you need to have some special DVD player or does this work with the usual system that plays CDs?

If this is unlocked, I can basically put any DVD into CD player and play a movie??

Thanks.

Originally Posted by solarbmw

But is VIM accessible to all models? Do you need to have some special DVD player or does this work with the usual system that plays CDs?

If this is unlocked, I can basically put any DVD into CD player and play a movie??

Thanks.

If you can't currently play a dvd while not in motion, then you won't be able to unlock dvd in motion.