WesR + XK-R(62 pics) - Bimmerfest - BMW Forums

Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > The Best of Bimmerfest! > The Detail Department

The Detail Department
Detailing tips, tricks to keep your bimmer in showroom condition.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-12-2012, 11:42 AM
WesR WesR is offline
Registered User
Location: Toronto
Join Date: Oct 2009
Posts: 62
Mein Auto: Batmobile
WesR + XK-R(62 pics)

Hey Guys and Gals,

The owner of this brand new XK-R(300km) had seen some of my previous work and contacted me expressing that he wanted to get his paint in top condition. We exchanged a few emails, I answered a few of his concerns, and we finally set a up date for the work to be completed.

Upon arrival I had a chance to walk around the car and inspect it in direct sunlight

After inspection I found some buffer trials or holograms(where the red arrows are pointing) left behind by a previous detailer, possibly during the new car prep

I brought it in and began the prep work starting with cleaning inside the inner barrel of the wheels with my EZ Brush

Lugnut area and calipers

And finally the rim face with a microfiber mitt

The exhaust was cleaned up as well



Getting on with the car wash we perform this with two buckets. Reason being is because we don't want to introduce more swirls into the paint and how we do this is, one bucket is filled with just water and the other just soap. As we wash the car after every panel we rinse off our wash media in the water only bucket before dipping it back into the soap bucket thus eliminating the chances of contaminating our soap water with the dirt we just picked up off the panel and reducing the risk of us dragging dirt filled soapy water across the paint which would scratch it causing more swirls

A soft natural sea sponge is what I use as my wash media

After rinsing down the car while it is still wet I began the claying process
If your not familiar with what clay is or what it does, it is basically an automotive clay bar that you rub on your paint along side a lubricant to remove contaminants embedded in the clear coat
If you have ever washed your car and even waxed it then felt the paint after all is said and done you'll notice that it is still very rough. The roughness that you are feeling is embedded dirt etc in the clear coat that needs to be removed by clay bar

Not bad but there was still some dirt that got picked up as you can see in the section closer to the index finger

Finally began drying the car with a very plush microfiber towel imported from the UK. After a shower I don't even dry my own body *with towels of this quality or as expensive hahaha

Once the vehicle is dry I measure the paint before polishing to look for any low spots I should be weary of or any inconsistencies in the paint.
Measurements are taken in microns

This is actually one of the inconsistencies I was referring to. Measurements around the car were reading in the 140 - 180 range then all of a sudden on the passenger door it shoots up to 231 microns. Usually what this means is that the area has been repainted which is not a bad thing as long as it is disclosed to the potential buyer

After measuring the depth of the paint we began to mask all rubber trim to protect it from being burnt by the buffers
Reply With Quote

See More Related BMW Stories

orion detailing co, toronto detailer

Forum Navigation
Go Back   Bimmerfest - BMW Forums > The Best of Bimmerfest! > The Detail Department
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -7. The time now is 02:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms