All BMWs 47.5 vs. 48.1 PSdZData CAFD Changes

Hello shawnsheridan.

Can you please send me a pm with the dl link?

Thank you

Originally Posted by ha.dampf

Hello shawnsheridan.

Can you please send me a pm with the dl link?

Thank you

PM Sent.

Shawn, I am gonna to program my 2013 F10M5. Should I download the 47.5 or 48 or 48.1? Can you please PM a link for whatever the file I need? Thank you!

Originally Posted by DingDing

Shawn, I am gonna to program my 2013 F10M5. Should I download the 47.5 or 48 or 48.1? Can you please PM a link for whatever the file I need? Thank you!

I just replied to your PM. Start there. If you get a missing CAFD from the 47.5 / 47.7 PSdZData, let me know.

Originally Posted by shawnsheridan

PM Sent, but the car with the missing CAFD may not need 48.1. Maybe it has one of the 6 CAFD's from 47.1 and orphaned in the 47.4 release. If you still have problems, post the exact needed CAFD.

Thanks for your PM sir ,, I will check the exact missing file and get back to you ,

Hi all. Just picked up a custom ordered 2013 535i yesterday and have been reading about programming additional different features. I've downloaded the Esys software, but can't find any links for the latest PSDZdata codes.

Could someone send me a PM with a link? Also, which version should I use for my car as it was just built? Do I need 48.1 or will 47.5 work?

Thank you in advance!

Originally Posted by hunter1234

Hi all. Just picked up a custom ordered 2013 535i yesterday and have been reading about programming additional different features. I've downloaded the Esys software, but can't find any links for the latest PSDZdata codes.

Could someone send me a PM with a link? Also, which version should I use for my car as it was just built? Do I need 48.1 or will 47.5 work?

Thank you in advance!

You downloaded E-Sys only, but you have no PSdZdata at all, or you have the 47.5 PSdZData too?

You can use 47.5 with the 45 CAFD's from 48.1 added to it.

Please pm the links, thanks!

Originally Posted by swingkwong

Please pm the links, thanks!

PM Sent.

Originally Posted by shawnsheridan

You downloaded E-Sys only, but you have no PSdZdata at all, or you have the 47.5 PSdZData too?

You can use 47.5 with the 45 CAFD's from 48.1 added to it.

I originally downloaded only E-Sys, but have since found PSdZData version 47.7. Is this the right version to use for a new 2013 5 series? If not, could you PM me a link to the correct version?

Thanks again! Looking forward to doing a few mods on the car.

Can i get them too please.

Originally Posted by hunter1234

I originally downloaded only E-Sys, but have since found PSdZData version 47.7. Is this the right version to use for a new 2013 5 series? If not, could you PM me a link to the correct version?

Thanks again! Looking forward to doing a few mods on the car.

Download that, and add what I just sent you via PM.

Originally Posted by boogysbmw

Can i get them too please.

I assume by "them", that you mean the 45 new CAFD's added in 48.1. PM Sent.

Awesome - will check it out and download now.

Thanks alot!

Shawn .. just started working wtih my F10 M5, I have 47.7 but it appwars there are newer CAFDs out there. would you PM the link for 48.1? thanks!

Originally Posted by efm9821

Shawn .. just started working wtih my F10 M5, I have 47.7 but it appwars there are newer CAFDs out there. would you PM the link for 48.1? thanks!

PM Sent.

hi shawn, kindly PM link for 48.1?

Yep, I need it to please (have 47.5 installed and working fine so far)

Originally Posted by ello888

hi shawn, kindly PM link for 48.1?

Originally Posted by Keyser Soze

Yep, I need it to please (have 47.5 installed and working fine so far)

PM's sent.

Originally Posted by efm9821

Shawn .. just started working wtih my F10 M5, I have 47.7 but it appwars there are newer CAFDs out there. would you PM the link for 48.1? thanks!

Shawn,

Same boat, could you please send me a PM with the link to the 45 new CAFD's added in 48.1. (2013 F10 M5 and I am currently downloading 47.7)

Thank you in advance and thank you for all you contribute...

@shawnsheridan: Hi, Can you please send me the link for 48.1 as well? Thank you very much.

Originally Posted by Glock 32

Shawn,

Same boat, could you please send me a PM with the link to the 45 new CAFD's added in 48.1. (2013 F10 M5 and I am currently downloading 47.7)

Thank you in advance and thank you for all you contribute...

Originally Posted by secany

@shawnsheridan: Hi, Can you please send me the link for 48.1 as well? Thank you very much.

PM's sent.

Thanks for the link, Shawn. I take it we just find/replace the existing 47.5 folders with the new 48.1 versions?

Originally Posted by Keyser Soze

Thanks for the link, Shawn. I take it we just find/replace the existing 47.5 folders with the new 48.1 versions?

Copy the new CAFD files to C:\ESysData\psdzdata\swe\cafd.

There is an instruction text file included with it.

Shawn (or another kind soul),

Can you please send the updated files to me too?

I've got the recently torrented 47.7, but I'm not able to read the FEM_BODY module on my 2013 f30. I get this error:

File for "cafd_00000794-004_122_077" not found!

Thanks a lot