Need Help With Two 2008 528i Issues - Bimmerfest - BMW Forums

Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 5 Series > 5 Series DIY

5 Series DIY
Knowledge Is Power! ~ The place for do-it-yourself threads on a variety of topics. Start a thread describing a particular job (oil change, cooling system overhaul, brakes, shocks and springs, etc.) or search for one you need help with!

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-11-2012, 10:46 AM
bzowk bzowk is offline
Registered User
Location: Tennessee
Join Date: Dec 2012
Posts: 4
Mein Auto: 2008 528i
Need Help With Two 2008 528i Issues

Good Afternoon!

My wife has a 2008 528i which so far has been a good car. It's currently having two issues that I need advice on, please.

The brake light came on a couple of days ago. She took it to a brake shop and they said that she needed to replace all pads, sensors on pads (had to look it up, but understand now), and all 4 rotors equaling $1000+! I haven't seen the rotors yet, but was told they could not be turned since the have no lip? Don't know what that means or if it's something specific to BMWs

Is there anything different (besides the sensor) with BMWs which isn't the norm? Are the rotors different than standard ones (besides size and fit of course)? I've swapped numerous brake pads and a few calipers and rotors before - just not on a BMW. I read the sensor is attached to the pads and wears down therefore signaling light so cable/sensor does need replacing. I'm hoping to find minimum rotor thickness specs stamped on rotor, itself.

Radio's Aux Input
In the center console, there is a 1/8" (headphone size) jack as well as a USB port. Previously, these were used in conjunction with the radio being switched to "AUX" to listen to an iPod, iPhone, or flash drive via USB or anything else via 1/8" jack.

As of about a month ago, she told me that they no longer worked. I played with them last night and found that I couldn't even switch the radio to "AUX." It appeared and I could scroll to it, but when selecting it, nothing happened. Before doing so, I inserted a flash drive with MP3s on it which was known good as I was listening to it in my truck earlier in the day.

The only posts on the web I've found similar to this suggests upgrading the software which seems to be $200 out of warranty (it is), but believe it may be a newer version as the background is grey - not brown. Also, nothing has changed since it stopped working to my knowledge.

Any help would be appreciated - Thanks!

Last edited by bzowk; 12-11-2012 at 10:49 AM.
Reply With Quote

See More Related BMW Stories

Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 5 Series > 5 Series DIY
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -7. The time now is 02:23 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001-2015 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms