Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > X Series > X5 E53 (1999 - 2006)

X5 E53 (1999 - 2006)
The X5 SAV Forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-01-2013, 09:23 PM
mgcorrei82 mgcorrei82 is offline
Registered User
Location: Big Bear Lake
 
Join Date: Nov 2012
Posts: 27
Mein Auto: 2003 BMW X5
SES light on with code p0125

Hi guys. i have a 2003 x5 3.0L with 104k miles. My SES light came on with the code P0125: "Insufficient Coolant Temperature For Closed Loop Fuel Control. Engine temperature has not increased and/or reached the correct level within a specified amount of time after engine startup." I notice the engine tempature then shoot up on my dash board, waring the engine might overheat.

I live up in the mountains and it gets pretty cold here. First time my light came on i started my car up early in the moring and it was about 5F outside. I reset the light. I was good for a few days, then i started my car up tonight when it was super cold again drove a few blocks and had the same issue.

What should i check first to fix this thing? Over the past few months i've cleaned my MAF, replaced my DISA, pre cat-O2 sensors, and spark plugs... so no problems there. I hope this wont cost too much. Thanks for the insight!
Reply With Quote
Advertisement
 

Bookmarks


Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > X Series > X5 E53 (1999 - 2006)
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 09:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms