328i exhaust question

The stock BMW 328i has two exhaust tips on the left side.

I want to have ONE exhaust tip on each side like the 335i.

What parts will I need to make this happen? Suggestions for parts?

Originally Posted by drewski554

The stock BMW 328i has two exhaust tips on the left side.

I want to have ONE exhaust tip on each side like the 335i.

What parts will I need to make this happen? Suggestions for parts?

That IS a tough one.

Let me think.....thinking....thinking....maybe you'll find something here?

Originally Posted by CALWATERBOY

That IS a tough one.

Let me think.....thinking....thinking....maybe you'll find something here?

haha well i already knew it was possible, just hoping for suggestions on what parts i would need to make this happen.

as you can tell, i'm an amateur, so please understand that everyone was a beginner at some point. anyways, can i make it happen with these parts?

http://www.turnermotorsport.com/p-56...28xi-330i.aspx

http://www.magnaflow.com/02product/d...rtnumber=11148

what else will i need for pipes?

Be aware that from the factory, the floor of the under-trunk area is different for the 328i vs. the 335i. This is the area that had the spare tire on the E46 and other models.

However, this may only be a problem if you are trying to use the factory 335i exhaust.

Originally Posted by alpinweiss

Be aware that from the factory, the floor of the under-trunk area is different for the 328i vs. the 335i. This is the area that had the spare tire on the E46 and other models.

However, this may only be a problem if you are trying to use the factory 335i exhaust.

OH, i see. Well I definitely won't be using a factory 335i exhaust.

I listed the two parts I want to use so far, but I don't know what else I'd need in terms of pipes.

Still wondering what additional parts i'd need to make this happen! So far:

BMW Performance Exhaust System
Magnaflow 2" Oval Muffler