Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 5 Series > E39 (1997 - 2003)

E39 (1997 - 2003)
The BMW 5-Series (E39 chassis) was introduced in the United States as a 1997 model year car and lasted until the 2004 when the E60 chassis was released. The United States saw several variations including the 525i, 528i, 530i and 540i. -- View the E39 Wiki

Reply
 
Thread Tools Display Modes
  #1  
Old 01-15-2013, 09:44 PM
akillies akillies is offline
99 540i Make Over
Location: Brooklyn NY
 
Join Date: Jun 2012
Posts: 71
Mein Auto: 99 540i
Steering wheel shake after M Par hu boring! Help

So I brought a set of E38 M pars to a reputable machine shop and had them bored to 74.1 mm. After finished I had them balanced and mounted and now feel a shake in the steering wheel between 40-50 mph. What Can I do to fix this this problem? Also what can I do if the hub is slightly off(too big)? I apologize a head of time is this question was already submitted in this forum..
Reply With Quote
Advertisement
  #2  
Old 01-15-2013, 11:41 PM
mjalloul11's Avatar
mjalloul11 mjalloul11 is offline
Officially Welcomed to the 'Fest
Location: Lebanon
 
Join Date: Apr 2012
Posts: 790
Mein Auto: 1996 528i 1999 MB c240
Did you have the shakes before, if not take them back to the shop and have them measure the bore again. the hub cannot be too big but can rust and that will feel like it is big . you can clean the rust off with a wire brush.
Reply With Quote
  #3  
Old 01-16-2013, 01:32 AM
Reuvers Reuvers is offline
Officially Welcomed to the 'Fest
Location: The Netherlands
 
Join Date: Apr 2011
Posts: 139
Mein Auto: BMW e39 540i '97
light shaking between 40-50 usually refers to bad balancing of the front wheels.

To add: is there a lot of balancing 'lead' on the wheels atm? This would indicate the wheels were 'off' either due to not being entirely straight or due to the bore process having been done incorrectly.

If there is little lead on the wheels then I would guess it needs better balancing.

Is the hub on the car too big? Then the wheel would never fit...
If the hole in the wheel is too big get plastic filler rings

Last edited by Reuvers; 01-16-2013 at 01:59 AM. Reason: more info
Reply With Quote
  #4  
Old 01-16-2013, 05:29 AM
JasonSC540ia JasonSC540ia is offline
Officially Welcomed to the 'Fest
Location: Alamogetto NM
 
Join Date: Aug 2009
Posts: 676
Mein Auto: 1999 740i
Do a search for "hub rings" or "senc rings" I think there called. Seems to have fixed the issue you discribe.
Reply With Quote
  #5  
Old 01-16-2013, 08:46 AM
tmvE39/E53/Z32's Avatar
tmvE39/E53/Z32 tmvE39/E53/Z32 is offline
Officially Welcomed to the 'Fest
Location: Seattle --> Atlanta
 
Join Date: Dec 2010
Posts: 1,900
Mein Auto: 03 540, 06 E53 4.8, Z32TT
If the hub-bore is bigger than 74.1mm, that machine shop is not doing a good job. You have to had it measure and use hub rings as suggested.
__________________

2000 Dinan S1 //M5 (my DD), 06 DINAN E53 4.8iS (wife's DD), 90 Straman Z32TT (my pride & joy ride)
Gone, but not forgotten: 01 E53 3.0i, 01 525i Sport, 03 DINAN 540i MSport and 91 Z32TwinTurbo
Reply With Quote
  #6  
Old 01-17-2013, 02:44 PM
akillies akillies is offline
99 540i Make Over
Location: Brooklyn NY
 
Join Date: Jun 2012
Posts: 71
Mein Auto: 99 540i
I have had the wheels mounted and balanced twice since I had the wheels bored and there is the safe amount of lead weights on wheels to assume they are balanced correctly. I had real bad experience with the co that bored the wheels they were supposed to do a complete restore and when I went to pick them up they looked like ****, so I told them I ain't paying for this, ill pay just for the boring and finally they agreed after a multitude of threats. There are only 2 machine shops in the NYC area that bore rims and I guess I have to go all the to Queens to see the other company to get there opinion. Sound good?
Reply With Quote
Reply

Bookmarks


Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 5 Series > E39 (1997 - 2003)
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 09:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms