F10 Vertical travel of the exterior passenger mirror

It is possible to change by coding the vertical travel of the exterior passenger mirror (Automatic Curb Monitor) when the reverse gear is engaged.

FRM>3020 FRM_SPIEGEL_PARAMETER, 10>ASP_BORDSTEINAUTOMATIK_DELTA>Werte=5A

The default werte value is 3B. This is a hexadecimal value equivalent to 56 (not sure if that defines the degrees of vertical travel). I tried various values and to my taste I can see the curb better with a werte value of 5A (decimal value of 90). Those interested in adjusting the vertical travel of the mirror may want to experiment with various values until they find a position of their liking.

JEG23

It's a great code~ thank you...
I like "2D"...

Originally Posted by meddoo

It's a great code~ thank you...
I like "2D"...

meddoo,

I am glad to see that this “oldie” has been useful to somebody else.

JEG23

Oldies but goodies!

Originally Posted by meddoo

It's a great code~ thank you...
I like "2D"...

Great code…


I like "DD" though

Originally Posted by gspannu

Great code…


I like "DD" though

Like these...

Originally Posted by shawnsheridan

Like these...

Attachment 359524

that one looks mor like "FF"

Originally Posted by razorback

that one looks mor like "FF"

I think that is just one of them...the pair is probably FFFF.

well, since "Werte" won't go higher than "FF" it must be "FF" per unit" .....

Originally Posted by razorback

well, since "Werte" won't go higher than "FF" it must be "FF" per unit" .....

Children

Originally Posted by JEG23

Children

Sure...this coming from a 5A man...

Originally Posted by shawnsheridan

Sure...this coming from a 5A man...

Nothing wrong with small as long as it looks good

Originally Posted by JEG23

Nothing wrong with small as long as it looks good

That's not what she says....

Originally Posted by shawnsheridan

That's not what she says....

You win

32C is perfect for me

Wow that rythms

Originally Posted by JEG23

You win

Now we are talking about a whole different "vertical travel"...

Some day ago, I had to buy the F20.

I did not apply, but the same applies to the F20.

The help of different coding required?

Originally Posted by meddoo

Some day ago, I had to buy the F20.

I did not apply, but the same applies to the F20.

The help of different coding required?

Er..what exactly are you asking? You lost me.

I'm sorry...

I'm not familiar with the quick reply.

F20 can change the data entry "ASP_BORDSTEINAUTOMATIK_DELTA" like F10, but did not succeed.

F30 did fail too.

Will I have to add some code for succeed?

Originally Posted by meddoo

I'm sorry...

I'm not familiar with the quick reply.

F20 can change the data entry "ASP_BORDSTEINAUTOMATIK_DELTA" like F10, but did not succeed.

F30 did fail too.

Will I have to add some code for succeed?

Did you get an error code, or did you successfully code it (e.g. chnage Werte from 3B to 5A), but mirror travel did not change?

I successfully code it, but mirror travel did not change.

This is similar to the case of the F10 turn signal blinks.

Always thanks...

Originally Posted by meddoo

I successfully code it, but mirror travel did not change.

This is similar to the case of the F10 turn signal blinks.

Always thanks...

Well, no one with an F10 can adjust the turn signal blinks, but you seem to be the only one unable to adjust the vertical travel.

I have no idea why though. After you change the value from 3B to 5A, and go back and read the ECU, does it still show 5A, or does it revert back to 3B?

It had not revert to the original values.

The value is changed, but it does not apply.

Thanks...

Originally Posted by meddoo

It had not revert to the original values.

The value is changed, but it does not apply.

Thanks...

Sorry then. I am out of ideas.