M5 rims on 528xi

Will m5 rims fit on 2008 528xi?

Sent from my SGH-T889 using Bimmer App

Nope they will poke out from the wheel wells. There's always reps you can get tho.

The offsets on xi wheels are much higher than on RWD E60s - ET:43, I believe, versus ET:18 (front) and 32 (rear). So you really can't fit RWD E60 wheels on an AWD model.

Umnitza has lots of replicas, though, like etnav382 says.

Thanks for the input guys do you have a link for a site I can get replicas?

Sent from my SGH-T889 using Bimmer App

http://www.umnitza.com/m5-style-166-...ls-p-1234.html

But - do some research on replica wheels before you buy. They are a subject of some contention around here. I bought a set of M6 replicas (from eBay, not from Umnitza or any other forum vendor) and had to sell them because I couldn't get rid of a 65 mph shimmy.

Originally Posted by 5sireese

Thanks for the input guys do you have a link for a site I can get replicas?

I bought mine here a few years ago. Have never had a problem. Good price too.

if you have any requests, please email us.

for the M6 replicas, do you have it in gunmetal?

The units are all gunmetal insides with polished face.

This is what I'm looking for. Need 19x8.5 et35 and 19x9.5 et43, 35, or 38

Do you have those in stock? Price?

Those are exactly what we have.

I will check and get back to you shortly to confirm actual sizes.

Thanks a lot

Ok, we have them in stock, a little more aggressive offset.
19x8.5 +35 19x9.5 +33 5x120

So, almost exactly what you are looking for. Since it's Friday, I can do them for $700 shipped for the set.

That will work. I get paid on Monday. Will that work

that will be fine, we'll be here 925 521 0577

Wow, I used to like the M6 167's quite a bit, but if they're putting them on crappy Pontiacs now, they are diminished - almost tainted

Sounds like a personal problem...

Pontiac/Holden GTOs are 5X120 right? same as BMW fitments - they fit all the same. Good cars, a hoot to drive.

Pjinca I have OEM 167s and it's obvious those are replicas. In fact you can easily spot the replicas from the OEM since the reps don't have any concavity to them.

Yep

Originally Posted by etnav382

Pjinca I have OEM 167s and it's obvious those are replicas. In fact you can easily spot the replicas from the OEM since the reps don't have any concavity to them.

Oh, I know, I just didn't like seeing them on a Pontiac. OEM 167's look great on an E60.

Originally Posted by etnav382

Pjinca I have OEM 167s and it's obvious those are replicas. In fact you can easily spot the replicas from the OEM since the reps don't have any concavity to them.

Kinda depends on which rep you get also.
Our 19s have good concavity but there are some out there that don't.
also depends on whether they are 19X10s or 9.5s vs 8s or 8.5s
Since reps come in a variety of sizes that arent' offered in the OE wheels.

Umnitza how much is (2) 19x9.5 m6 reps

we can only do a set of 4, sorry man.