Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 5 Series > 5 Series DIY

5 Series DIY
Knowledge Is Power! ~ The place for do-it-yourself threads on a variety of topics. Start a thread describing a particular job (oil change, cooling system overhaul, brakes, shocks and springs, etc.) or search for one you need help with!

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-25-2013, 06:24 PM
ProStreetDriver ProStreetDriver is offline
Registered User
Location: Ontario
 
Join Date: Nov 2007
Posts: 60
Mein Auto: 94 BMW 740I
DIY: E39 Brake Switch Replacement (Video)



Video tutorial on how to replace the brake light switch under the dash on a BMW E39. This particular video was done on a 1997 BMW 540i. If your brake lights aren't working, this could be the culprit of the issue.

Procedure:
-start by removing the carpet piece on the center console towards the underneath of the using removing 1 phillips screw, then sliding the trim piece towards the rear of the vehicle
-next move onto the plastic pan on the underside of the dash on the driver's side of the vehicle
-the plastic pan is held in with twist clips towards the front by the pedals and phillips screws towards the dash side
-once removed, you now have 2 plugs to disconnect from the chime speak (squeeze the plug tabs and pull straight out)
-remove the electrical connector from the backside of the switch just pulls straight out
-locate the brake pedal switch (do not get it confused with the clutch switch if applicable)
-the easiest way I found to remove the switch was to brake off the plunger on the front side rather than sliding the sleeve all the way forward
-now it is easier to slide the red sleeve forward and pull the switch out of the bracket
-in order to reinstall the new switch, you must pull the red sleeve out enough so the tabs are able to collapse (the white plunger can also be pulled out)
-pushing on the brake pedal, reinstall the new switch, then push the red sleeve back in
-let the pedal back and reinstall the electrical connector
-make sure the brake lights are working
-trim installation in reverse
__________________
1994 BMW 740I E32: Angel Eye Halo Headlights, Quad Parking Light Mod, 2 Stainless Double Wall Tips, Magnaflow 14386 w/ 2.5" duals from resonator back, 17" M Parallels, CF Emblems, Custom Painted Calipers & Rotors... pics/info BMW.Tech
Soon To Be: Custom Cold Air Intake, HID Headlights & Fogs

Reply With Quote
Advertisement
 

Bookmarks


Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > 5 Series > 5 Series DIY
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 09:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms