Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > BMW Motorcycles (aka Beemers) and the Competition

BMW Motorcycles (aka Beemers) and the Competition
Have an interest in BMW motorcycles or just motorcycles in general? Discuss the line of BMW motorcycles and how they may compare to the rest of the competition in this forum!

Reply
 
Thread Tools Display Modes
  #1  
Old 12-03-2013, 07:43 AM
Bernie@Bimmerfest Bernie@Bimmerfest is offline
Administrator
Location: Maryland
 
Join Date: Aug 2012
Posts: 1,066
Mein Auto: 83' 323is, 07' MINI JCW+
The BMW R nineT - Start of Production at the BMW Berlin Plant



Berlin. The BMW Berlin plant today witnessed the last of a total of seven exciting vehicle production launches this year a very special series production launch during the BMW Motorrad anniversary year. The new BMW R nineT rolled off the assembly line for the very first time. The model is reminiscent of the brand values from the meanwhile 90 exciting years of BMW Motorrad history. The start of production was witnessed by employees, friends of the company and celebrity guests such as Horst Lichter and Ronald Zehrfeld, as well as customizing specialists from Urban Motor, boxer-fans from Motorcircus and journalists from all over the world.

At midday, the first three fully assembled bikes passed through an extremely crucial point at the BMW Berlin manufacturing facility the roller dynamometer, where no less than 1,000 parameters are tested within the shortest time and where around 100 spectators were present at the start of production.

The entire project team has completed two and a half years of development work, from the original concept up to series maturity. "During the initial phase, our designers had already sat together with vehicle developers from Munich", explains Dr. Marc Sielemann, head of production at BMW Motorrad. "So we were able to incorporate production-related aspects into the concept at a very early stage, thereby ensuring the quality of our manufacturing processes."

BMW Motorrad chief Stephan Schaller congratulated his team on their achievements and on a unique motorcycle that sets a new benchmark at BMW Motorrad in terms of diversity and customizing. The guests present in Berlin were able to convince themselves personally of this. Within an authentic "workshop" setting, project manager Roland Stocker and his team demonstrated that the R nineT can take on an entirely new and individual character with little effort and a wide range of accessories.

During a guided tour of the plant following the fulminant vehicle presentation, the guests gained exclusive insights into the process of assembling the BMW R nineT. This is where attention to detail becomes evident on the bike. For example, the aluminium nameplate is riveted to the steering head of the vehicle, this being a style element, the design of which was inspired by historic BMW motorcycles.

During 14 assembly cycles and futher pre-assembly places, 21 employees ensure that motorcyclists with a passion for the classic bike experience riding pleasure on a genuine BWW. Due to the decision to opt for the classic air/oil-cooled boxer engine, two different boxer power units are now produced parallel to each other at the Berlin plant for the first time. The engine known from the BMW R 1200 GS was replaced by an air/water-cooled boxer engine with the introduction of the new edition of this model.

The aluminium tank of the R nineT is proof that people at the BMW Berlin plant are well able to cope with challenges. The tank's high-quality look is achieved by a black lacquer finish combined with hand-brushed, clear-coated aluminium surfaces. In order to ensure the required adhesion of the clear lacquer to the aluminium surface, specialists at the Berlin motorcycle plant developed a special transparent dispersion. This transparent film serves as a bonding coat between the aluminium surface and the clear lacquer a technological innovation that makes the exciting design of the nineT possible.

Check out more on the R nineT here.
Attached Thumbnails
Click image for larger version

Name:	P90140493.jpg
Views:	900
Size:	165.1 KB
ID:	410764   Click image for larger version

Name:	P90140488.jpg
Views:	105
Size:	90.8 KB
ID:	410765   Click image for larger version

Name:	P90140491.jpg
Views:	111
Size:	140.3 KB
ID:	410766   Click image for larger version

Name:	P90140495.jpg
Views:	104
Size:	154.4 KB
ID:	410767  

Last edited by Bernie@Bimmerfest; 12-03-2013 at 10:37 AM.
Reply With Quote
Ads by Google
Reply

Bookmarks

Tags
bmw motorcycles, bmw motorrad, bmw r ninet production, r ninet


Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > BMW Motorcycles (aka Beemers) and the Competition
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Forum Jump


All times are GMT -7. The time now is 02:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms