BimmerFest BMW Forum banner
Status
Not open for further replies.

PSdZ Data 47.4 (with E-Sys 3.18.4) UPDATE: 47.5

291K views 2K replies 774 participants last post by  Almaretto 
#1 · (Edited)
Thanks to shawnsheridan - I've got the apparently the latest PSdZ Data 47.4.

It was slightly inconvenient (took 4 days!) to download it from rapidshare, so I've decided to make a torrent.
It has everything (and unzipped) - PSdZ Data 47.4, E-Sys 3.18.4 and documentation and install/usage instructions - as it was in the original torrent with v.46.1_psdzdata.

So I've only replaced 46.1 with 47.4.

So here is the torrent attached (rename .pdf to .torrent)
View attachment BMW E-Sys 3.18.4 PSdZ Data 47.4.pdf

UPDATE 9/30/2012: Thanks to shawnsheridan again - now we have version 47.5 !!
Torrent attached (rename .pdf to .torrent):
View attachment BMW_E-Sys_3.18.4_47.5.pdf

This is being seeded 2MB/sec - so enjoy.
I'll leave 47.4 to be seeded as well, but it's recommended to stop downloading it and start new 47.5 - it should be much sooner.
 
See less See more
#3 ·
I am currently the only one seeding...
Uploading at the full speed of my cable (105Kbytes/sec) - so it would take 2 days.
But after then when there will be more people - it will get better. I'll also put it in on my company's webserver - it will be 10MB/sec
 
#5 ·
I'm all for Torrent and Usenet alternative download options, but the best bet remains a paid RapidShare Pro account. $11 per month is nothing.
 
#12 ·
47.5 is seeded - see first post.
This is the complete set with all files - I just copied the whole 47.5 folder.
You can open the torrent and download only new (updated) files, or you can download the whole torrent - it has everything including the E-Sys software and instructions.
 
#14 ·
Hi Shawn
I prefer also rs for downloading. Could you send me the links please?
I'll get my Car back next wednesday with a SW Update.

Thank you
 
#15 ·
Hi Shawn
I prefer also rs for downloading. Could you send me the links please?
I'll get my Car back next wednesday with a SW Update.

Thank you
PM Sent.
 
#33 ·
This won't work for an m43 e46. You need NCS Expert and SP-Daten instead.
 
#35 ·
They aren't. The 6 that were part of 47.1, are were not in 47.4 are also not in 47.5 now.
 
#46 ·
Shawn

I got my car back today.
Thank you for the new files.
Do i need to re-install e-sys and put the files in the folder? Or is it ok just to delete the old ones and put the new in?

Thx
 
#50 ·
and the old cafd files? delete or let them there?
i think better to delete, or not?
 
#53 ·
You can just leave them. Every time you read your ECU, it overwrites the previous .ncd.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top