BimmerFest BMW Forum banner

the VERY best of E39 Links

795K views 111 replies 53 participants last post by  Cuzzman 
#1 · (Edited)
This post has been deleted
#14 · (Edited)
Somebody already listed this link;

http://www.e38.org/e39/

but it's pretty much everything you every wanted to know. almost every link on there is worthwhile.

I've been in the middle of doing my valve cover gaskets and this is by far the best guide for V8 engines;

http://www.bimmerboard.com/forums/posts/124059

While you got your valve covers off, have them beadblasted and powdercoated. I found this guy out in Texas who agreed to blast, prime and powder coat both covers for only $40 plus 2 way shipping;

http://www.jerryspowdercoating.com/

Good Luck!
 
#17 ·
#24 · (Edited)
#25 · (Edited)
#27 · (Edited)
This brand new cn90 E39 front suspension DIY is an "instant classic" for shock/strut replacement DIY!

The DIY for building a Garmin GPS icon is off the wall a bit ...

Here is a molding DIY from bimmerfest and one from bimmerforums ...

And, you can't get a simpler front-door passenger-side window-glass replacement DIY

Well, maybe you can ... the world's simplest DIY ... How to avatar on bimmerfest

If your battery goes dead
frequently (especially if your fans are erratic) ...

Why I don't recommend the Motive Vacuum Oil Extractor ...

Some DIY sites for E39 specifically would be useful too.
- http://www.e38.org/e39/

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top