BimmerFest BMW Forum banner

Can someone do me a Favor please

1K views 0 replies 1 participant last post by  01silber 
#1 ·
there are two edges where the hood and front bumper skirt meet right in front of both the front wheels approx. 8-12 in. of edge,
will you please look at your on both sides and see if they both(sides)
have the exact same line up including overhang to one another
i ask because on mine all other edges of the hood,doors,fender,bumper assembly match up fine except for the one edge at the drivers side
where the hood edge meets the bumper assembly edge not by alot but the hood does over hang alittle and none at the passenger side please let me know if this is common or not .
i realize not all body panels can all line up to the exact measurement but in this case the drivers side has alittle over hang
and the passenger does not.
please let me know
max
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top