BimmerFest BMW Forum banner
Status
Not open for further replies.

Official F10 Coding thread---Exploring Your F10

745K views 1K replies 94 participants last post by  DreamCar 
#1 · (Edited)
I hope this will be the most intriguing thread!

We will discuss all the options available and try to share as much information as possible .

Knowledge Transfer: Find the attached pdf in the below link and go through it ... It will give you the basics to start also check the attached PDF (Thanks to modular93 fox)

http://www.bimmerfest.com/forums/showpost.php?p=6823380&postcount=6 (If the link doesnt work go to post # 6 in this thread)

How to make the Enet cable (You need this cable to connect your car and you laptop), Its not hard to make your own cable.
It would cost around 10 to 15$ to make a cable.

Please use the below link to find the detailed description on how to make your cable (Thanks to IMSw1) and also check teh attached PDF for detailed schematics

http://www.bimmerfest.com/forums/showpost.php?p=6825214&postcount=52 (If the link doesnt work go to post # 52 in this thread)

List of things that can be programed: (Thanks to All contributing Members)

Please check the Cheat Sheet for the list

Data Files Required to code your car:

F001 psdzdata covers the F01/F02/F04 7-series and F07 5-series
F010 psdzdata covers the F10 5-series and F12/F13 6-series
F020 psdzdata covers the F20 1-series and F30 3-series (There is no Z4 F-chassis yet)
F025 psdzdata covers the F25 X3-series (There is no X5 F-chassis yet).

More details in the below Link:

http://www.bimmerfest.com/forums/showpost.php?p=6827272&postcount=91

Cheat Sheet:

What Module to modify.. What Parameter and What value will be explained in the attached cheat sheet... This will have all our new discoveries going forward.

This thread is dedicated to help fellow festers! Will add more details as and when available just follow the thread for updates!

Volunteers: People who can install for others /Willing to help others with installation

1) DreamCar (NJ,MD)
2) Shawnsheridan (Houston,TX)
3) Imsw1 (Dayton, OH)
4) Svache (Oahu.HI)
5) hd750Li (DFW, TX)
6) wdimagineer (MD)

This is just the basic info... Will add more info in next two days

All the credit goes to Sean and Shawn

Disclaimer: Try it/use it/ request it at your own risk and blah blah and all that cra*P.......

Important: Please dont use "Quote" when replying... In that way it will be less cluttered and easy to browse once it is sticky... :thumbup:

Sub Threads:

SLI :http://www.bimmerfest.com/forums/showthread.php?p=6863231#post6863231

For the video lovers here is teh feast:
http://youtu.be/1dzvhZggafg

http://youtu.be/HdgecnfqoDg



Transfering your phone ring tone to your car.

Before

http://youtu.be/EG4MR-o1eSg

After

http://youtu.be/WuLUgAGypfw
 

Attachments

See less See more
7
#121 ·
Shawn every thing is going Smoother than I thought.., I am gonna make a detailed report on the stuff I am doing.

I was able to get the windows control , trunk control an turn signal in HUD ,.. I liked turn signal better than all!!!

Working on M HUD and speed info on HUD...
 
#122 ·
@DreamCar; Good luck on the M HUD! As for Speed Limit Info, enabling both Speed Limit Parameters won't work, as the car has to be equipped with a camera fitted to the rear-view mirror that permanently monitors speed limits, both on signs by the roadside and above the carriageway.
 
#123 ·
@hans_gregor; Enabling MDRIVE:

Adds "M Drive 1" & "M Drive 2" on Settings screen; however, DSC, Engine, Chassis, and Steering settings can not be set - Nonfunctional. It also adds "M dynamic driving syst." checkbox on Settings=>Info Display screen. When checked it completely turns off the dashboard tachometer Efficient Dynamics display. - Nonfunctional
 
#125 ·
@DreamCar; Can you confirm on your car that with FRM /3050/NSW_AUS_BEI_FL enabled, your fog lights stay on with High Beams? It works on mine, but someone else said it didn't.

Also, assuming you have ECO Pro, can you test KOMBI/3003 FZG_Ausstattung / SPA_ENABLE, which is supposed to enable a gear shift indicator? It didn't seem to do anything on my MY2011 car without ECO PRO; however, it may only work in the ECO PRO mode to get an indicator to get into the next gear.
 
#128 ·
Seed!!!!

It looks like maybe 1-2 people got complete copies of the torrent, and then nothing. Torrents only work when a fairly large # of people host them. Otherwise later downloaders will be posting "Sombody please seed!" and it will take days for them to download from one seeder. If you use torrents, please download and seed this one for the good of the 'fest.
 
#130 · (Edited)
Is there any hope of getting the ol'e Sport/Comfort switch to remember?
 
#131 ·
I have been following this thread with great interest and spent last night downloading the file linked by rlsolomon but I don't know how the reassemble the parts downloaded. There are 16 files but they don't have an extension. I've tried as .ZIP and .RAR files but ALZIP reports "Format not supported". Anyone got any ideas on how to assemble these files?
 
#133 ·
How many files do you end up with and how big? I might be able to find a better way to host them.
 
#134 ·
I have 16 files named BMW E-Sys.zip.001 to 16. The first 15 files are 716,800KB and the last file is 658,280. I am now using WINRAR and I get a message "Unexpected end of archive". I close the message and I can then see the folder structure in WINRAR but get a "The archive is either in unknown format or damaged" when I try click on extract. Sounds like a corrupt file?
 
#135 · (Edited)
@Dreamcar; My expectation is that given the Gear Shift Indicator SPA_ENABLE code is in KOMBI, is that it would appear in the Dashboard. Nice Video BTW!
 
#137 · (Edited)
@DreamCar; I am not sure now on the Fog Lights. Maybe, I also coded something at the same time that works in conjunction with NSW_AUS_BEI_FL to make it work. I'll need to dig deeper into it and see if I can figure it out.

The next thing you need though, besides a spare battery, is to code your Fob to unlock your house. :D

When you get back up and running, would you check EFF_DYN_SPORT_CID and EFF_DYN_SPORT_UNIT and see if you can display the Power and Torque meters in hp and ft lb?
 
#138 ·
Has anyone been able to successfully download the torrent and extract it? We need to know if it is working or corrupted. Extracted it should be about 14.1 GB. Obviously I do not need it, but I am pulling it down now to see if it works, but maybe someone could save me the trouble?

Besides the torrent, and the one File Sharing upload, both of which now seem problematic, several other people have been handed the package. Please post it for others. The more download options, the better. :thumbup: Thanks!
 
#140 ·
Ok, I have now managed to reassemble the downloaded files and extract the archive. I had to use the programme "7-Zip file manager" as both WINRAR and ALZIP identify the archive as being corrupt. I have installed and configured the software as per the included instructions. Now to build the cable so I can do an actual test in the vehicle.

Anyone know whether I can use the same E-Sys Target connection settings for my F11 as for the F10?

Thanks very much for putting this collection together and sharing it. The process makes a lot more sense now.
 
#142 ·
@mrashton; Thank you for confirming the torrent works with 7-Zip.

@DreamCar; MF! I don't get why on my car I am stuck in kW and Nm. Hey, but at least my Fog and High-beams work. We need more testers. I wonder if the difference is MY2011 versus MY2012. Or maybe the ISTA/P versions on our cars. I am at ISTA/P 45.1 on the car. Do you know what yours is?
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top