BimmerFest BMW Forum banner

Bmw 318is 1999 Fan Switch

899 views 1 reply 2 participants last post by  hornhospital 
#1 ·
Hi, the fan on my 318is will not switch on as it should do.
It is an intermittent problem as it will work with the aircon on if i wiggle the connector to the switch around.

The fan also works if the connectors are bridged..
Basically i am unsure which part(s) i need to replace..
The temp sensor which screws into the rad, or will it be the connector with the 3 wires going in to it? If so how do i replace this please?

thanks in advance .. :)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top