|
|
||||||
|
5 Series DIY
Knowledge Is Power! ~ The place for do-it-yourself threads on a variety of topics. Start a thread describing a particular job (oil change, cooling system overhaul, brakes, shocks and springs, etc.) or search for one you need help with! |
|
|
|
Thread Tools | Display Modes |
|
#1
11-23-2012, 11:13 PM
|
|||
|
|||
Oil Filter Housing Gasket - Replacement (M54)
Refer to the PDF and if anyone has any problem with the file, let me know and I will post it again. This DIY is for 2004 525i with M54 engine.
Last edited by kskane; 11-28-2012 at 03:03 PM. 
|
|
#2
11-26-2012, 06:33 PM
|
|||
|
|||
|
Very helpful! I was able to follow these steps and successfully complete the oil filter housing gasket replacement. Do you happen to have any instructions on replacing the heat exchange gasket? This is also leaking.
|
|
#3
11-28-2012, 03:10 PM
|
|||
|
|||
|
Quote:
|
|
#4
04-30-2013, 02:13 PM
|
||||
|
||||
|
Thanks for the DIY. Planning to tackle this along with the VANOS. Is there an RTV Sealant used along with the gasket? Or is it simply,
1 remove old gasket (scrape) 2 clean area for new gasket 3 install new gasket
__________________
- 2003 525I Sedan - Manual Tranny, M-tech Bumpers Front/Rear, shadowline, M5 Mirrors, 19" Miro 279's, NNR Coilovers, Front lip, 50% tint, Dinan ECU Stage II, Dinan CAI, Dinan Free Flow Exhaust, DICE Ipod, Connects2/Parrot Bluetooth, SSK Kit, AC Schnitzer Shift Knob, CDV Delete, - 2008 R350 Mercedes Wagon 
|
|
#5
05-14-2013, 06:18 PM
|
|||
|
|||
|
Quote:
|
|
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
