BimmerFest BMW Forum banner

135i on Professor MS3

10K views 7 replies 5 participants last post by  SSR Wheels 
#1 ·
Check out this 135i which belongs to John Zhang of 1013mm. He's running 18x9 and 18x10 Professor MS3. Gallery post here



 
See less See more
3
#8 · (Edited)
The owner of this car was going for a particular look with an aggressive wheel fitment. For those of you that like a meaty tire there is a wide range of offsets for not just this wheel but all of our wheels. Here is the offset chart for this particular wheel in 18"

http://www.ssr-wheels.com/wheels/wheelchart.asp?id=37&size_id=4&keepThis=true&TB_iframe=true&height=500&width=700



For the 1 Series, you can use SL Disk front and back since the overhang of the brakes compared to the rotor hat is minimal. The numbers in the grey box above the colored offset columns is the depth of the lip. Let us know if you have any other questions.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top