So I have finished my swap mechanically but now I need to get it started. I know there is a way to ground the auto harness out to thinking it is in neutral. I had a ZF auto, any ideas which pins need to be connected?
Van, thanks for the post but that's not what I am trying to do. I only have the clutch switch and not the module. There is a way to short the auto trans harness into thinking it is in neutral. Not the best long term fix bit it will have to work for now.
Bump guys essentially what I am asking is quick two pins from the zf auto plug need to be connected by a wire so the computer thinks there is still an auto trans in neutral
Thanks for the reply I figured out my own solution
Sent from my PantechP9060 using Bimmer App
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
BimmerFest BMW Forum
11.4M posts
753.1K members
Since 2001
A forum community dedicated to BMW owners and enthusiasts. Come join the discussion about Bimmerfest events, production numbers, programming, performance, modifications, classifieds, troubleshooting, maintenance, and more! Bringing the BMW community together.