BimmerFest BMW Forum banner

Need Help. This car is driving me crazy

3K views 2 replies 2 participants last post by  mxracer65 
#1 ·
My car would not go into gear. the clutch was not working. so i dropped the trans and found that my clutch and pressure plate were totally wore down and stuck together. so i replaced them, the throw-out bearing, and the slave cylinder. i put it all back together and it still has the same problem. a buddy of mine said that my slave cylinder may need adjusting or that there maybe some air still in the lines. help please.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top