|
|
||||||
|
E36 (1991 - 1999)
The E36 chassis 3-Series BMW was a huge hit among driving enthusiasts from the first moment the car hit the pavement. The E36 won numerous awards over the years it was produced and is still a favorite of many BMW enthusiasts to this day! -- View the E36 Wiki |
|
|
|
Thread Tools | Display Modes |
|
#1
06-23-2007, 07:31 AM
|
|||
|
|||
Help with fitting digital clock/temp read out
Hey guys. I am pretty new to this forum so go easy on me ;-)
Moving on to the problem. currently have a analog clock and I would like to upgrade to a digital clock/temp read out. I am very careful to say digital clock/temp read out because it it not an OBC...... I have torn the old clock out and the digital clock/temp read out is in place but it does not work. What I Had going to the old clock: Red-Yellow (Power) Red-Grey (illumination) Brown (Ground) I have a seen a diagram for an 18 button OBC online, and apparently the digital clock/temp read out has the same top 10 pins on the connector?  but I am not sure because that diagram is for a 1998 E36 not a 1991 like mine. Here is the diagram I am referring to:  Really I am not sure what to connect to make this thing work  Thanks, -Cody 
|
|
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
