Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**

Vinyl wrapped the rear trunk on this Subaru with the 3M Di-Noc carbon fiber material. Took a before picture of the trunk with the holes and the after once the trunk was wrapped. Note, it may or may not show up in the pictures, but there will still be slight impressions of the holes where the vinyl is covering over.

Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.



















-Don

donathon@gmail.com

Vinyl wrapped the rear trunk on this Subaru with the 3M Di-Noc carbon fiber material. Took a before picture of the trunk with the holes and the after once the trunk was wrapped. Note, it may or may not show up in the pictures, but there will still be slight impressions of the holes where the vinyl is covering over.

Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.



















-Don

donathon@gmail.com

Vinyl wrapped the rear trunk on this Subaru with the 3M Di-Noc carbon fiber material. Took a before picture of the trunk with the holes and the after once the trunk was wrapped. Note, it may or may not show up in the pictures, but there will still be slight impressions of the holes where the vinyl is covering over.

Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.



















-Don

donathon@gmail.com

Vinyl wrapped the rear trunk on this Subaru with the 3M Di-Noc carbon fiber material. Took a before picture of the trunk with the holes and the after once the trunk was wrapped. Note, it may or may not show up in the pictures, but there will still be slight impressions of the holes where the vinyl is covering over.

Hopefully these pictures will answer many people's questions of how well vinyl covers holes that I've been asked.



















-Don

donathon@gmail.com

Are those bullet holes?

Yes.

Tinted the headlights, tail lights, mirror lights, fog lights, and some other misc items on this ML350:















-Don

donathon@gmail.com

Originally Posted by ChrisUNC79

Are those bullet holes?

Originally Posted by Don Nguyen

Yes.

Was that like a 'no questions asked' kind of job? What the hell is going on down there in Irvine?

The way the holes are spread out and the apparent angle of them makes it look like they came from inside the trunk, or someone standing over the vehicle shooting down into it.

Crazy Subaru drivers!

I was just being sarcastic/kidding, cause I wasn't sure if you were serious or not. Those holes were from where the stock STI spoiler mounted through/to.

-Don

I guess they are a bit too precisely symmetrical to be random gunshots.

PMs and e-mails replied to.

Let me know if I missed anybody.

thanks.

-Don

I've had people ask if I can vinyl wrap hard tops and just how flexible my vinyl is...

Let me know if this answers your questions, and if you have any others

















-Don

donathon@gmail.com

PMs replied to.

Let me know if I missed anybody. Been a bit busy lately, so sometimes I'd read the PM but forget to respond to it later.

-Don

Vinyl wrapped the hood of this Acura RSX in the 3M di-noc carbon fiber vinyl. Don't mind the dusty marks/shadows. Forgot to clean it off before taking the pictures.

Just to be clear, since I know I'll have some people ask me if I can wrap their hoods. The material is not wide enough to wrap/do most hoods, except on smaller cars, such as this RSX. If you're interested in getting your hood wrap, measure your hood beforehand and give me the measurements of your car, so that way I can determine if it'd be possible or not.







-Don

donathon@gmail.com

PMs replied to.

-Don

Vinyl roof wrapped this R35 GTR's roof with some 3M Di-Noc carbon fiber vinyl, and also did the center of his rear spoiler.

Let me know what you guys think.













-Don

donathon@gmail.com

PMs replied to.

-Don

Vinyl wrapped the roof of this BMW E92 M3 in the carbon fiber 3M di-noc material.

Just to avoid any confusion, his antenna was painted matte black, not wrapped. Also, it was only placed on there temporarily for pictures, hence why you can see a gap between the antenna cover and roof in some of the pictures.

Let me know what you guys think.

















-Don

donathon@gmail.com

PMs replied.

-Don

What finish?

Here's pictures of a white BMW E90 3 series that I vinyl wrapped the roof with in gloss black. He also had black wheels, so it'll give those who are curious how the black roof works with black wheels.













-Don

donathon@gmail.com

PMs and e-mails replied to.

-Don

How about something a bit different. Here's a new Honda Insight that I vinyl wrapped the roof with in matte black.















-Don

donathon@gmail.com

Some real quick pictures. Here's some tails on an Nissan Altima that I tinted/wrapped with a red clear vinyl film:

Before:




After:






-Don

donathon@gmail.com

PMs and e-mails replied to.

-Don

Here are pictures of the fogs that I vinyl wrapped/tinted in a yellow film.

Let me know if any of you would be interested in getting this done on your cars.







-Don

donathon@gmail.com