Trunk Roundel

Has anyone found an aftermarket roundel for the trunks of our 63/64s? I want the Black/White for the hood and wheels, but only if I can get the trunk to match.

I think your going the same route as me. lol. I want to do the all b/w logos.. have you seen wheel center caps in b/w for an m6 rim?

I want these http://cgi.ebay.com/ebaymotors/ws/eB...ht_1802wt_1182

I like that they are black white and carbon fiber when you look really close

For the trunk roundel I think you will need to get the overlay stickers from Bimmian or JSLevi.

Originally Posted by Yorgi

For the trunk roundel I think you will need to get the overlay stickers from Bimmian or JSLevi.

stickers?!

Those look cool.... I think I may go this route...

Originally Posted by Jace_91

I think your going the same route as me. lol. I want to do the all b/w logos.. have you seen wheel center caps in b/w for an m6 rim?

I want these http://cgi.ebay.com/ebaymotors/ws/eB...ht_1802wt_1182

I like that they are black white and carbon fiber when you look really close

Im not sure if these fit for sure, it says they don't fit on the convertible but I don't see why they would be any different?!

yeah i saw that, my car is a coupe though.

Originally Posted by BadboyzTn

yeah i saw that, my car is a coupe though.

Well let me know how it goes if you decide to order them. I messages them to see if they had something for the verts. And for the center caps that all matched and could hopefully get a deal.

Originally Posted by Jace_91

stickers?!

Yes stickers, like di-noc, they are very popular.

Because the rear roundel also acts as a trunk opening button it is non-standard. I have not seen a custom E63/E64 trunk roundel. Hood/wheel/steering wheel is no problem.

Check out the "Roundel Overlays" in this link. Note that JLevei does not sell a trunk roundel for the E64 if you click on the "CF Replacement Roundel" link.

The hood roundel works perfectly for the trunk... with a little modification. The pins need to be ground down. Then you simply apply emblem glue or m3 tape and stick. I was a little concerned about whether it would be secure and look right. It looks great and seems very secure. I have had mine on there for about two months with no issues.

Same problem as everyone else, no trunk roundel available so I did the black sticker overlays. I've been using them for the past 2yrs. w/no problems. Covers well and most dont even realize they are stickers, really looks like I changed the roundel.

i got the black/white hood and trunk roundels on, i also did what Dallas_6 did, the one that i ordered had the two pins, so i had to cut the pins and shave it down to make it flat then apply double sided sticky tape along the interior of the b/w roundel and stuck it on, it comes out nice and looks flush.

oh and the stock one is attached by double sided sticky tape, so it takes a little longer to take off then the hood roundel

I have black/white roundels(I did plain colors no carbon fiber look)...I just used a hood roundel(same size as trunk round) and got rid of the knobs on the back of the roundel using pliers and used 3M auto trim tape.


Sent from my iPhone using BimmerApp