
|
|
||||||
|
E24 (1976 - 1989)
The BMW 6 Series (E24) was the first variant of the 6 series produced by BMW from 1976 through 1989. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Altitude
What's good? I am a 21 yr old young man on my four dinosaur. E30, e28, selling my e21, and just copped a e24.
I have some clean 5x100 borbet 5 spokes which are 16x8 I believe. That's might be 7.5 the more I think about t. Anywho I have some fairly new kyb shocks which are quite stiff and my ride is fairly high up. I am contemplating buying new billy sprigs or taking a coil out. I know that I want to drop about two inches so one coil would be fine and ideal with that rule of thumb and I know that I won't be bouncing on the freeway like a Honda civic. But has anyone taken a coil out or two and have some before/after pictures. It would save me a few pretty pennies to cut the coils opposed to buyin new ones. |
|
#2
|
|||
|
|||
|
You are going to have rear shock issues. The shocks will be to long for the cut springs, and when you hit a bump, the springs will unseat. you have to go with Billly sport shocks
|
|
#3
|
|||
|
|||
|
Thank you. How about the front?
|
|
#4
|
|||
|
|||
|
Well, the real deal is to use sports anytime you lower. I know guys who have cut and ride on HD Bils in the front, but the backs will be an issue.,\Find some Koni adjustables. Than all you do is adjust the dampening to suit the ride you want with whatever springs you use. Lots o luck on finding those though
|
|
#5
|
|||
|
|||
|
Haha. Thank you.
|
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|