Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > The Best of Bimmerfest! > BMW Coding and Programming

BMW Coding and Programming
Discuss coding options and features on your BMW here.

Reply
 
Thread Tools Display Modes
  #1  
Old 11-30-2014, 06:44 AM
jackylooo jackylooo is offline
Officially Welcomed to the 'Fest
Location: Taiwan
 
Join Date: Nov 2014
Posts: 116
Mein Auto: F10 520D
Trying to enable electronic oil meter but failed

Hi ,

Trying to enable the electronic oil meter on my F10 520d with following parameter:

HU_CIC OELSTANDSMENU = aktiv
HU_CIC OELSTAND_OENS = aktiv

I can see the oil meter menu in the screen after FDL Coding, but when I tried to run measure on it, it simply cannot work.

Is there anything else need to be added? Is there a VO code for this feature?
Would this feature also Hardware associated? Mine is 2014 520D

Any suggestion would be appreciated !
Reply With Quote
Advertisement
  #2  
Old 11-30-2014, 12:15 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is offline
Officially Welcomed to the 'Fest
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 13,059
Mein Auto: 2011 535i M-Sport
I do not think it works with Diesel Motor.
__________________

- 2011 535i M-Sport (Born 10/10) - AW/BLK/DW - /ZMP (w/ARS, EDC, DHP, & AD) /ZPP /ZP2 (w/ZPS & ZPT) /ZCV (w/SCAD) /6FL /6VC
- Mods - M5 343M 20" Forged Wheels / 6WB MFID / 2TB SAT / 4U1 Ceramic / 6NR Apps / PDV 5k Fogs / Rear Fogs / Euro Tail Lights / Cyba Quad Tips
Reply With Quote
  #3  
Old 11-30-2014, 12:55 PM
matg28 matg28 is offline
Registered User
Location: UK
 
Join Date: Oct 2013
Posts: 54
Mein Auto: F10 520D M Sport 2013
Not a chance this will work on a pre-LCI model.

There are no electronic Oil level sensors on the N47 engine pre LCI F10's. I have pre and post LCI, pre has a manual dipstick, post has the electronics.
Reply With Quote
  #4  
Old 11-30-2014, 01:00 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is offline
Officially Welcomed to the 'Fest
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 13,059
Mein Auto: 2011 535i M-Sport
For Petro motor, at least N55, any VO Date from 0312 will enable OELSTAND_OENS, and this is before LCI production beginning 0712.
__________________

- 2011 535i M-Sport (Born 10/10) - AW/BLK/DW - /ZMP (w/ARS, EDC, DHP, & AD) /ZPP /ZP2 (w/ZPS & ZPT) /ZCV (w/SCAD) /6FL /6VC
- Mods - M5 343M 20" Forged Wheels / 6WB MFID / 2TB SAT / 4U1 Ceramic / 6NR Apps / PDV 5k Fogs / Rear Fogs / Euro Tail Lights / Cyba Quad Tips
Reply With Quote
  #5  
Old 11-30-2014, 01:03 PM
matg28 matg28 is offline
Registered User
Location: UK
 
Join Date: Oct 2013
Posts: 54
Mein Auto: F10 520D M Sport 2013
Interesting Shawn!

But for sure, the 520d pre-lci is a manual only job. Wonder if it's possible to retrofit the parts?
Reply With Quote
  #6  
Old 11-30-2014, 01:05 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is offline
Officially Welcomed to the 'Fest
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 13,059
Mein Auto: 2011 535i M-Sport
I have no idea what parts are needed. I know that no matter what, I could not get it working on my 2011 F10.
__________________

- 2011 535i M-Sport (Born 10/10) - AW/BLK/DW - /ZMP (w/ARS, EDC, DHP, & AD) /ZPP /ZP2 (w/ZPS & ZPT) /ZCV (w/SCAD) /6FL /6VC
- Mods - M5 343M 20" Forged Wheels / 6WB MFID / 2TB SAT / 4U1 Ceramic / 6NR Apps / PDV 5k Fogs / Rear Fogs / Euro Tail Lights / Cyba Quad Tips
Reply With Quote
  #7  
Old 11-30-2014, 01:08 PM
vince59 vince59 is offline
Officially Welcomed to the 'Fest
Location: italia
 
Join Date: Nov 2010
Posts: 213
Mein Auto: ducati
I have a diesel and it works
Reply With Quote
  #8  
Old 11-30-2014, 01:08 PM
matg28 matg28 is offline
Registered User
Location: UK
 
Join Date: Oct 2013
Posts: 54
Mein Auto: F10 520D M Sport 2013
Found these part numbers:

# Date From Date To Part Number Steering Description Qty Required Old Part Number
16 01/04/2000 N/A 7508003 Oil levelling sensor 1 1439810
16 01/07/2006 20/08/2010 7567722 Oil levelling sensor 1 7548062
16 15/07/2010 N/A 7607909 Oil levelling sensor 1 7567722

but I think this might be for oil empty !
Reply With Quote
  #9  
Old 11-30-2014, 01:12 PM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is offline
Officially Welcomed to the 'Fest
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 13,059
Mein Auto: 2011 535i M-Sport
Quote:
Originally Posted by vince59 View Post
I have a diesel and it works
Yes, so it seems each motor at some production point switched over to the new Electrical Oil-Level Detection display.

My car has Electrical Oil-Level Detection, but OELSTAND_OENS changes iDrive "Vehicle Info" => "Vehicle status" => "engine oil level" (Oil Lamp Icon with Check Mark) that shows actual oil level within Min / Max range to just Oil level is Ok screen and adds new "Measure engine oil level" (Oil Lamp Icon with Refresh Circle) that is used to force an oil measurement display.
__________________

- 2011 535i M-Sport (Born 10/10) - AW/BLK/DW - /ZMP (w/ARS, EDC, DHP, & AD) /ZPP /ZP2 (w/ZPS & ZPT) /ZCV (w/SCAD) /6FL /6VC
- Mods - M5 343M 20" Forged Wheels / 6WB MFID / 2TB SAT / 4U1 Ceramic / 6NR Apps / PDV 5k Fogs / Rear Fogs / Euro Tail Lights / Cyba Quad Tips
Reply With Quote
  #10  
Old 11-30-2014, 04:57 PM
maszika maszika is offline
Registered User
Location: Hungary
 
Join Date: Mar 2014
Posts: 70
Mein Auto: F10
I have 525d N47 from 01/2013 pre LCI, and i have stick and oil menu too from factory.
Reply With Quote
  #11  
Old 11-30-2014, 05:10 PM
jackylooo jackylooo is offline
Officially Welcomed to the 'Fest
Location: Taiwan
 
Join Date: Nov 2014
Posts: 116
Mein Auto: F10 520D
Thanks for all the information shared, looks like I have to give up on this feature too..
Reply With Quote
  #12  
Old 12-01-2014, 02:37 AM
matg28 matg28 is offline
Registered User
Location: UK
 
Join Date: Oct 2013
Posts: 54
Mein Auto: F10 520D M Sport 2013
Been doing some more digging on this:

The 520D F10 LCI has this part for the level sensor:

16 OIL LEVELLING SENSOR 1 12617508003 $163.50 See MH 0138861

which looks very similar to the part for the pre-LCI.

Getting different results from varying ETK's, so this is weird to say the least.

I'll try to re-enable mine this week - maybe 54.1 might make the difference - just noticed the OP has a CIC, I've got the NBT.

The local dealer didn't have a clue when I asked them......
Reply With Quote
  #13  
Old 12-01-2014, 07:08 PM
jackylooo jackylooo is offline
Officially Welcomed to the 'Fest
Location: Taiwan
 
Join Date: Nov 2014
Posts: 116
Mein Auto: F10 520D
Quote:
Originally Posted by matg28 View Post
Been doing some more digging on this:

The 520D F10 LCI has this part for the level sensor:

16OIL LEVELLING SENSOR112617508003$163.50See MH 0138861

which looks very similar to the part for the pre-LCI.

Getting different results from varying ETK's, so this is weird to say the least.

I'll try to re-enable mine this week - maybe 54.1 might make the difference - just noticed the OP has a CIC, I've got the NBT.

The local dealer didn't have a clue when I asked them......

Please kindly update us your result, Thanks
Reply With Quote
  #14  
Old 12-14-2014, 09:01 AM
jackylooo jackylooo is offline
Officially Welcomed to the 'Fest
Location: Taiwan
 
Join Date: Nov 2014
Posts: 116
Mein Auto: F10 520D
I wonder maybe there is a VO code related to this feature, can someone share your VO table if your oil level check function is default enabled. Thanks!
Reply With Quote
  #15  
Old 12-14-2014, 09:35 AM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is offline
Officially Welcomed to the 'Fest
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 13,059
Mein Auto: 2011 535i M-Sport
Quote:
Originally Posted by jackylooo View Post
I wonder maybe there is a VO code related to this feature, can someone share your VO table if your oil level check function is default enabled. Thanks!
There is no VO Code for it.
__________________

- 2011 535i M-Sport (Born 10/10) - AW/BLK/DW - /ZMP (w/ARS, EDC, DHP, & AD) /ZPP /ZP2 (w/ZPS & ZPT) /ZCV (w/SCAD) /6FL /6VC
- Mods - M5 343M 20" Forged Wheels / 6WB MFID / 2TB SAT / 4U1 Ceramic / 6NR Apps / PDV 5k Fogs / Rear Fogs / Euro Tail Lights / Cyba Quad Tips
Reply With Quote
  #16  
Old 12-14-2014, 09:58 AM
jackylooo jackylooo is offline
Officially Welcomed to the 'Fest
Location: Taiwan
 
Join Date: Nov 2014
Posts: 116
Mein Auto: F10 520D
Thanks Shawn, so is there any thing else need to be coded in order to make it work or it is also hardware related? Why some 520D had this function and some are not?
Reply With Quote
  #17  
Old 12-14-2014, 10:07 AM
shawnsheridan's Avatar
shawnsheridan shawnsheridan is offline
Officially Welcomed to the 'Fest
Location: Houston, TX
 
Join Date: Jan 2009
Posts: 13,059
Mein Auto: 2011 535i M-Sport
Quote:
Originally Posted by jackylooo View Post
Thanks Shawn, so is there any thing else need to be coded in order to make it work or it is also hardware related? Why some 520D had this function and some are not?
I am pretty sure it is a hardware issue.
__________________

- 2011 535i M-Sport (Born 10/10) - AW/BLK/DW - /ZMP (w/ARS, EDC, DHP, & AD) /ZPP /ZP2 (w/ZPS & ZPT) /ZCV (w/SCAD) /6FL /6VC
- Mods - M5 343M 20" Forged Wheels / 6WB MFID / 2TB SAT / 4U1 Ceramic / 6NR Apps / PDV 5k Fogs / Rear Fogs / Euro Tail Lights / Cyba Quad Tips
Reply With Quote
  #18  
Old 12-17-2014, 09:45 AM
matg28 matg28 is offline
Registered User
Location: UK
 
Join Date: Oct 2013
Posts: 54
Mein Auto: F10 520D M Sport 2013
Not had a chance to try this yet - too many Christmas parties, and I'm not going near the car with a hangover :-)

I'll update when I've tried !
Reply With Quote
  #19  
Old 12-18-2014, 02:54 AM
SergAA SergAA is offline
Registered User
Location: Russia
 
Join Date: Jul 2013
Posts: 55
Mein Auto: 535d 2013
Mine 535d (June 2013, pre-lci) have digital oil meter...
Reply With Quote
Reply

Bookmarks


Forum Navigation
Go Back   Bimmerfest - BMW Forums > The Best of Bimmerfest! > BMW Coding and Programming
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



Forum Jump


All times are GMT -7. The time now is 07:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
© 2001-2011 performanceIX, Inc. All Rights Reserved .: guidelines .:. privacy .:. terms