F10 2013 F10 psdzdata

Originally Posted by user4970

Here the same issue
want to code F30 but only some modules were shown

HU_CIC is missing which contains many features which i want to code
actually ive 46.3 and 46.6 both arent good for me

could you send me 47.4 please
are these 6 cafd-files which are in 47.1 and in 47.4 missing important?
do i need them?

thanks in advance

Check you PM. Start with 47.4, and see where that gets you. The other 6 from 47.1 are only important if you car actually needs one (pretty small chance)

Thanks

i try

Originally Posted by shawnsheridan

Check you PM. Start with 47.4, and see where that gets you. The other 6 from 47.1 are only important if you car actually needs one (pretty small chance)

Shawn, do you remember the issues we've had with 47.1? did you figure out what it was?

are you still using it or already on 47.4? As you know I have 47.1. Are there big differences between them?

Originally Posted by rauan

Shawn, do you remember the issues we've had with 47.1? did you figure out what it was?

are you still using it or already on 47.4? As you know I have 47.1. Are there big differences between them?

After figuring out how to make 47.1 work using certain files from 46.6, I switched over to 47.4. No difference, just about 30 new CAFD files, and you only need those if you have 47.4 on your car.

Hi I'm new here. Do not speak English so I have to work with Google translator and I hope it works.
I encode for some time and have the V46.6 work load but not, or are too old.
Does anyone have a link for 47.4?
Would be very grateful.

Is there a Esys the German experts speaking?
Would have access to a 750iL F02 and F10 M5 both have no more VMAX limit. NOT made ***8203;***8203;by Dynan.
Is it interesting?

Sent from my GT-I9300 using Bimmer App

Originally Posted by Beer55

Hi I'm new here. Do not speak English so I have to work with Google translator and I hope it works.
I encode for some time and have the V46.6 work load but not, or are too old.
Does anyone have a link for 47.4?
Would be very grateful.

Is there a Esys the German experts speaking?
Would have access to a 750iL F02 and F10 M5 both have no more VMAX limit. NOT made ***8203;***8203;by Dynan.
Is it interesting?

Sent from my GT-I9300 using Bimmer App

PM Sent for 47.4,

Yes. I am very interested in how VMAX Limit is removed via coding. Please advise.

I do not know how to do it :-( I only sometimes coded access to the cars and I know that the 750iL is the encoding value of VMAX to 03, will take a closer look after the FA.

Best) for V47.4 thanks :-)))))))

I do not know how to do it :-( I only sometimes coded access to the cars and I know that the 750iL is the encoding value of VMAX to 03, will take a closer look after the FA.

Best) for V47.4 thanks :-)))))))

Originally Posted by Beer55

I do not know how to do it :-( I only sometimes coded access to the cars and I know that the 750iL is the encoding value of VMAX to 03, will take a closer look after the FA.

Best) for V47.4 thanks :-)))))))

Well, good luck. Make sure you read this thread:

http://www.bimmerfest.com/forums/sho...d.php?t=630462

We looked into it pretty hard, and can not get anywhere with it.

Can somebody please send me the rapidshare link for the V47.4. My current 46.6 was working fine last week until I had my car serviced for a code change in the Start/Stop default function. I am now getting file not found error. Thanks in advance.

Originally Posted by valeram

Can somebody please send me the rapidshare link for the V47.4. My current 46.6 was working fine last week until I had my car serviced for a code change in the Start/Stop default function. I am now getting file not found error. Thanks in advance.

PM Sent.

Can you please help me with 47.4 too
46.1 returns an error with my F30

It's on usenet as well - you might want to search there as well...

Originally Posted by SandmanJK

Can you please help me with 47.4 too
46.1 returns an error with my F30

PM Sent.

Thanks a lot!

Can you please help me with 47.4 too
many thanks

Originally Posted by chris88

Can you please help me with 47.4 too
many thanks

PM Sent.

Hi guys. I read through this Forum for quite a while and it seems you know everything

As my Dec 2011 535xd goes for reprogramming next week (I guess from 46.x to 47.x) I would be interested in a PM with 47.7 info.

Can you please help me with 47.4 too?

Originally Posted by 332701

Hi guys. I read through this Forum for quite a while and it seems you know everything

As my Dec 2011 535xd goes for reprogramming next week (I guess from 46.x to 47.x) I would be interested in a PM with 47.7 info.

Can you please help me with 47.4 too?

PM Sent.

Hi Shawn

could you please PM me 47.4 links.

Thanks a lot

Originally Posted by doctom

Hi Shawn

could you please PM me 47.4 links.

Thanks a lot

PM Sent.

shawnsheridan, would you mind sending me the download link for 47.4?

Cheers,

Hi Shawn,
Can you send me a DL link for 47.4 too? Thanks!

Hi Shawn,
I have a 2013 and 47.4 now but I can't access CAS - can I get those files?
Thanks!

Originally Posted by shawnsheridan

Ok, good.

You actually have 47.1 on your car, and for some inexplicable reason, 47.4 did not contain 6 CAFD files that were in 47.1, so if you need the other 5, let me know.

Right Orphan Files (6) Size Modified
-------------------------------------------------------------
cafd_0000000f.caf.005_024_220 1,006,395 6/14/2012 8:28:02 AM
cafd_0000000f.caf.005_024_221 1,004,963 6/14/2012 8:08:18 AM
cafd_0000000f.caf.005_024_222 1,005,095 6/14/2012 8:00:04 AM
cafd_00000a3f.caf.005_001_008 142,521 6/14/2012 7:06:02 AM
cafd_00000794.caf.002_020_029 6,060,497 6/14/2012 7:05:54 AM
cafd_00000794.caf.004_122_077 6,468,403 6/14/2012 6:40:58 AM

Originally Posted by digital

shawnsheridan, would you mind sending me the download link for 47.4?

Cheers,

PM Sent.