Z3 Roadster (E36/7) M roadster and angel eyes - Bimmerfest - BMW Forums

Welcome to Bimmerfest -- The #1 Online Community for BMW related information! Please enjoy the discussion forums below and share your experiences with the 200,000 current, new and past BMW owners. The forums are broken out by car model and into other special interest sections such as BMW European Delivery and a special forum to voice your questions to the many BMW dealers on the site to assist our members!

Please follow the links below to help get you started!

Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > Z Series > E36/7 Z3 (1996-2002)

E36/7 Z3 (1996-2002)
E36/7 Z3 Roadster, Z3 coupe, Z3 M Roadster and Z3 M Coupe talk with our gurus here.

Thread Tools Display Modes
Old 10-04-2012, 05:09 PM
Registered User
Location: Salem Nh
Join Date: Sep 2012
Posts: 20
Mein Auto: 99 m Roadster
M roadster and angel eyes

Hs anyone done the conversion too angel eyes on a roadster how did it come out and how did you get there
Reply With Quote
Old 10-08-2012, 01:42 AM
Lanyon Lanyon is offline
Registered User
Location: UK
Join Date: Sep 2012
Posts: 4
Mein Auto: Z3
Hi, recently done mine and first of all it really is worth the grief and hardship, they look fantastic.
Remove the light unit by unplugging all connectors to the rear, don't worry they are all different and can't be put back wrong.
Once out you need to bond the ballasts to the front bodywork somewhere near the headlight unit so the cables still reach. Whilst they are bonding you need to prepare for removing the clear front lens off the light unit. I used a large wide screwdriver.
To do this you can either warm the units in an oven as some suggest but it works really well with an hair dyer on full blast and moving it across about 4" at a time. After about a minute and of coarse unclipping the metal clip retainers you can start placing the screwdriver head in between the two plastic parts (one black and one clear) and slightly twisting the blade. If the temperature is correct then you will start to see the original bonding material start to stretch like chewing gum and you can continue round still maintaing temperature with the hairdryer until it pops out. While the bonding material is still warm I pushed any that came out back in as this can be used again when replacing back the lens.
You will need to drill a small hole in the black cover to allow the cables to come out. I placed mine strategically at the top and out of the way of any fowling parts. (this can be siliconed afterwards).
Beware of placing the rings to low on the headlight unit as when you close the two back together you may well find that the bottom of the rings will fowl on the two pieces coming together.
You will need to run the hairdryer around the unit again prior to clamping them together again and don't forget the metal retaining clips.
You can run a small bead of clear silicon around the units if you want but mine was fine as I ensured I got the original bonding material warm.
It took me about 50 minutes for each light unit and forget latex gloves as the black bonding material loves them and won't let go. keep some paint stripper handy to clean up afterwards.
Good luck
Reply With Quote

See More Related BMW Stories

Forum Navigation
Go Back   Bimmerfest - BMW Forums > BMW Model Discussions > Z Series > E36/7 Z3 (1996-2002)
Today's Posts Search
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -7. The time now is 03:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
© 2001- VerticalScope Inc. All rights reserved.