
|
|
||||||
|
E39 (1997 - 2003)
The BMW 5-Series (E39 chassis) was introduced in the United States as a 1997 model year car and lasted until the 2004 when the E60 chassis was released. The United States saw several variations including the 525i, 528i, 530i and 540i. -- View the E39 Wiki |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Fan Removal wrench and counter rotation tools on Ebay
Check it out Ebay #170940461702
|
|
#2
|
||||
|
||||
|
Why?
__________________
|
|
#3
|
||||
|
||||
|
Cause he is tarted...
__________________
![]() Touring the nation, one state at a time |
|
#4
|
|||
|
|||
|
I'd like to see how thick they are, and if the holding tool has the cutout for the recessed nuts.
If the recess is not there, the tool won't work on a V8, only a six.
__________________
Ed in San Jose '97 540i 6 speed aspensilber over aubergine leather. Build date 3/97. Golden Gate Chapter BMW CCA Nr 62319. |
|
#5
|
|||
|
|||
|
Hey, I am just trying to save you guys some coin. If you want to ridicule me for doing so, the joke must be correct. What is the difference between a porcupine and a BMW? The BMW has the pricks on the inside!
|
|
#6
|
||||
|
||||
|
It's interesting and all but it seemed like you are advertising..
__________________
![]() Touring the nation, one state at a time |
|
#7
|
||||
|
||||
|
I had two sets from ebay.
The ktc is thick and strong. The baum is alot thinner and flimsier.
__________________
ESS Tuning m60 version software m60 intake manifold a.f.e. c.a.i. 3" obx catback full powerflex urethane setup 545 ssk cdv delete m5 rear sway bar M5 chassis rods M5 3.15 lsd Bc-r coilovers w/ swift springs Akebono=suck ss braided brake lines coming soon: Jb lwfw
|
|
#8
|
||||
|
||||
|
That's actually not a bad price for both OP. I bought my open ended 32MM wrench for $7. Luckily, I did not need the wp holder.
__________________
|
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|