All BMWs 47.5 vs. 48.1 PSdZData CAFD Changes

I'm still seeding 47.7 if I recall correctly (at work at the moment). Looks like I need to update that too. I need to sort out the best way to keep this updated with the latest stuff or break it up better.

Originally Posted by snowboardjoe

I'm still seeding 47.7

Thanks
Btw, it's currently well seeded. If only everyone did their fair share (as they have done this time)

Originally Posted by ahmadr

Thanks
Btw, it's currently well seeded. If only everyone did their fair share (as they have done this time)

Good to hear. Last night is was looking slim, so I was wondering. I've been maxed out on my upload the past week, 24x7.

Originally Posted by ahmadr

Shawn (or another kind soul),

Can you please send the updated files to me too?

I've got the recently torrented 47.7, but I'm not able to read the FEM_BODY module on my 2013 f30. I get this error:

File for "cafd_00000794-004_122_077" not found!

Thanks a lot

Originally Posted by snowboardjoe

I'm still seeding 47.7 if I recall correctly (at work at the moment). Looks like I need to update that too. I need to sort out the best way to keep this updated with the latest stuff or break it up better.

PM's sent.

Originally Posted by shawnsheridan

PM's sent.

Shawn,

I'm still getting the same error:

FEM_BODY [40] [F351072]
readCPS o.k.
cafd_00000794-004_122_077 Fehler:
File for "cafd_00000794-004_122_077" not found! [C012]

do you (or anyone else online) happen to have the cafd_00000794-004_122_077 file?

Thanks a lot

Originally Posted by ahmadr

Shawn,

I'm still getting the same error:

FEM_BODY [40] [F351072]
readCPS o.k.
cafd_00000794-004_122_077 Fehler:
File for "cafd_00000794-004_122_077" not found! [C012]

do you (or anyone else online) happen to have the cafd_00000794-004_122_077 file?

Thanks a lot

Yes, this is an orphaned CAFD from 47.1, and not new. PM Sent.

One more question. What is the equivalent to the KAFAS module on the F30?
Or is there a way to search all the modules in one shot?

Originally Posted by ahmadr

One more question. What is the equivalent to the KAFAS module on the F30?
Or is there a way to search all the modules in one shot?

I thought the F30 had a KAFAS module as well. If not, I would look in FEM_BODY, which has most everything in it.

Unfortunately, there is no way to search all modules at once.

Hello shawn,

I am also new to the forum.
I have 47.5 files, could you please send me the link to new 48.1 files.

Thank u very much!

Originally Posted by till69

Hello shawn,

I am also new to the forum.
I have 47.5 files, could you please send me the link to new 48.1 files.

Thank u very much!

PM sent.

Hello shawn,

I have 47.5 files, could you please send me the link to new 48.1 files.

Thank u very much, greetings from Germany

Noel

Hi Shawn,
Same request please. I have the 47.5 data, and looking for the 48.1 upgrade link.

Thanks,
Brian.

Originally Posted by bmwessen

Hello shawn,

I have 47.5 files, could you please send me the link to new 48.1 files.

Thank u very much, greetings from Germany

Noel

Originally Posted by brian335

Hi Shawn,
Same request please. I have the 47.5 data, and looking for the 48.1 upgrade link.

Thanks,
Brian.

PM's sent.

Awesome, thanks. I re-purposed an old laptop for this project- it must have been on the shelf for about 7 or 8 years. Of course the hard drive was too small, so I put in a cheap solid state drive and stripped out tons of stuff from XP. The result is an amazingly fast ancient laptop, and a database heavy program like E-sys really enjoys this environment with the SSD. I now have the parts for the cable, just one small detail remains. The car. It will arrive here in Ottawa likely in January. Other than that, all is good.

Brian.

Originally Posted by shawnsheridan

Copy the new CAFD files to C:\ESysData\psdzdata\swe\cafd.

There is an instruction text file included with it.

Shawn, there was no .txt file in the sendspace ISTA-P v.48.1 PSdZData New CAFD's Since v.47.5.rar file. You may want to plug one in there.

I copied them over to the cafd directory and they dropped right in. I take it the crackers just add new cafd files as they figure them out and then there is a higher version (e.g. 48.1) available? And then Esys occasionally updates their software as well, which sounds like more of a pita to upgrade. The last time I was poking around Esys connected to the car back on 11/17 I did have problems finding most of the ACSM 3000 Ausstattungsflags folder so perhaps they are there now and I can turn off the seatbelt warnings, etc.

I don't think many of us actually know what is going with these apps, just that they work. : ) Thanks for all your help.

Originally Posted by Keyser Soze

Shawn, there was no .txt file in the sendspace ISTA-P v.48.1 PSdZData New CAFD's Since v.47.5.rar file. You may want to plug one in there.

I copied them over to the cafd directory and they dropped right in. I take it the crackers just add new cafd files as they figure them out and then there is a higher version (e.g. 48.1) available? And then Esys occasionally updates their software as well, which sounds like more of a pita to upgrade.

I don't think many of us actually know what is going with these apps, just that they work. : ) Thanks for all your help.

Ok. I guess I forgot to include it in the sendspace upload.

What do you mean crackers? I ripped those files straight from ISTA/P 2.48.1, and they are unedited.

E-Sys is easy to upgrade. When that time comes, just run the Installer.

Hello Shawn,

Please send me the link to new 48.1 files.

Thank you very much!

Originally Posted by rezo

Hello Shawn,

Please send me the link to new 48.1 files.

Thank you very much!

PM Sent.

Shawn, can you please send me the link to new 48.1 files.

Thank you in advance!

Hi Shawn, can u send me the link for 48.1 files too?

Thank you

Sorry for my ignorance but is 47.7 plus 48.1 all I need? I see everywhere people talking about 47.5.........

Originally Posted by carina77

Shawn, can you please send me the link to new 48.1 files.

Thank you in advance!

Originally Posted by xklusiv

Hi Shawn, can u send me the link for 48.1 files too?

Thank you

PM's sent.

Originally Posted by rezo

Sorry for my ignorance but is 47.7 plus 48.1 all I need? I see everywhere people talking about 47.5.........

You can add these to 47.5 or "47.7", and you will be fine, because I based it on new CAFD's in 48.1 compared to 47.5.

That said, I also did a file comparison of PSdZData in 47.5 and the recent 47.7 that was posted, and they are 100% identical. So, it was either not actually 47.7 and was 47.5, or the files changes in 47.7 did not affect any PSdZData files (e.g changes were to SP-Daten not PSdZData).

Originally Posted by shawnsheridan

PM's sent.

Thank you...

Is there anyone in the Northern Virginia / DC area that has coded their F10 5 series and is willing to help walk me through the process? Also, would you have an ethernet to OBD II cable that I could borrow to do the coding?

Please PM me if so.

Thanks in advance!