Fix for Sticky OBD/ENet Cables from One Stop Electronics
As others have found the cables from One Stop Electronics are really difficult to get out of the OBD port of the car. After 4-5 rounds of coding and being forced to briskly yank the cord out with a pair of pliers, I decided to fix the cable.
I used a dremel to cut off the small protrusion on the cable. The cable now detaches with a gentle tug on the plug, but is secure enough that it should not come undone during the coding process. Hope this is helpful to others with sticky cables.
2013 535i M-Sport | Carbon Black/Oyster&Black Dakota Leather | Driver Assistance | Premium | Technology | Sport Transmission | Multi-Contour Seats
Retired: 2011 328i Sedan | Jet Black/Black Dakota Leather | Premium