kufatec tv modul for f10 cic
I edited kufatec TV module for cic bmw f10
With a esys I've added:
601 to the VO. Into HU_CIC, 3000 HMI: TVM_VARIANTEN = tvm_dvb_t_rse
CDMM_TV_FOLLOWING, _AUTOSTORE, _PRESENTLIST, _AUDIOTRACE, _EPG and _TELETEXT set to activ.
Into 3001 EXBOX, TV set : wert_1
I did everything according to the instructions but I can not get video on the screen.
I have audio and menu, but no video on tv and on video over USB on Kufatec modul.
Video signal I connected the 19 pin and 26 pin (picture in attachments),
I'm not sure that the video must go to 19 pin and 29 pin, because they are pin for night vision.
Red and black were not on the 19 pin and 26 pin but the 18 pin and 27 pin ( video switch)and I do not removed them.
Can someone tell me who installed the TV kufatec module, why I not have a video but only audio on the screen.
Is anyone had any such problems because I'm on the forum for the BMW E90 read that can be a problem with the module and necessary update.
I sent in a request and Kufatec but no answer. Maybe because I have not bought from them but from maxxline through ebay.
Last edited by vzinic; 12-15-2012 at 06:46 AM.