|
|
||||||
|
E36 (1991 - 1999)
The E36 chassis 3-Series BMW was a huge hit among driving enthusiasts from the first moment the car hit the pavement. The E36 won numerous awards over the years it was produced and is still a favorite of many BMW enthusiasts to this day! -- View the E36 Wiki |
|
|
|
Thread Tools | Display Modes |
|
#1
12-11-2012, 08:35 PM
|
|||
|
|||
|
Idle Problem MAF?
I have a 1995 325i and I'm getting that up and down revving thing. It'll go from about 200 rpm up to 1500 rpm and will eventually die if I press on the gas too much. And when I press down, it really lags and is not strong at all.
Took a video of it so you can hear the noise and see what it does. Duct tape on the boot. There's a nice tear in it. I just cleaned the MAF sensor and still nothin. I got the code 1215 which IS the MAF sensor. So I'm about ready to buy a new sensor and a new boot. But before I drop 200 dollars, are there any other things I could check to see what the problem might be? Thanks a lot!_a_ 
|
|
|
| Bookmarks |
| Forum Navigation | |||||||
|
Today's Posts Search | ||||||
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
