E46 FS: ZKW Right (Passenger) Bi-Xenon Headlight Assembly | Not Working

Up for sale is my ZKW passenger (right) headlight assembly. I recently took it out of my car due to it not lighting up. I initially thought it was just a bad bulb. I replaced it with a Phillips D2S bulb from TheRetroFitSource.com:

The Retrofit Source Inc
------------------------------------------------------
Available Installation Guides: http://www.theretrofitsource.com/install_guides.php
Date Ordered: Tuesday November 20, 2012

Products
------------------------------------------------------
1 x D2S: Philips 85122+ (PhilipsD2S) = $95.00
------------------------------------------------------
Sub-Total: $95.00
USPS First Class Mail: $4.28
Total: $99.28

That didn't solve the problem. When I put the new bulb in, I also noticed quite a bit of condensation that had built up on the inside of the lens as well as in the assembly itself. The exterior of the lens is a little pitted from normal road rash but still works fine.



So, if someone wanted to put a little money and some time into this, it would make a nice project for a bowl retrofit. I honestly don't know if the ballast or the ignitors are working at all. It would probably need some new gaskets and protective caps as well to ensure it was sealed properly.

This was pulled from a 2003 330i. Please verify fitment prior to purchase. According to RealOEM.com it should fit the following applications:

RealOEM.com 63127165834

The good news is it comes with a brand new D2S bulb installed. If you want, I can throw in the mounting bracket as well. (Warning: The ZKW assembly doesn't fit on the AL mounting bracket).

I'm looking for $150 plus shipping or shoot me a PM with an offer and we'll see if we can agree on a price. Paypal only, please.

No Refunds or Exchanges. Item sold as is (Not currently working).
Thanks,_a_