All BMWs Z4 Coding help for Bimmer and coding newbie

I am a new Bimmer, 2009 Z4, owner and have never coded.
I have down loaded all the manuals from this Thread.
I love working on my Z and want to learn to code but do not want to attempt to code for the 1st time without help.
I am computer literature , but again never coded a car.
I am looking for any one in the Boston area or any where to help me code and learn the skill.
I will buy the the cable and other needed items.

The Z has Comfort Access and here is what it does already:
Doors lock via ridges on door handles
Doors unlock when near car and pull up on the door handle
The Hardtop will now open and close with the FOB and windows as well.

From all the other owners out there here is what I would love to code the Z for:
- add folding mirrors when car is shut off.
- Doors unlock automatically when you turn off the engine
- Windows open close with FOB when the roof is up
- Opening doors will not interrupt auto window up
- turn on the torque and power meter for your video screen
- Turn signal from 3 time to 5
- Transfer iPhone ringtones to car
- DVD-in-motion
- Turn off 90 seconds of dinging when a seatbelt is not fastened.
- Turn off the warning on your GPS screen when you start the car
- Tires show temp and psi under vehicle status.

Any other items recommended would be appreciated.
Thanx in advance.

Originally Posted by BMWZ4RIDER

I am a new Bimmer, 2009 Z4, owner and have never coded.
I have down loaded all the manuals from this Thread.
I love working on my Z and want to learn to code but do not want to attempt to code for the 1st time without help.
I am computer literature , but again never coded a car.
I am looking for any one in the Boston area or any where to help me code and learn the skill.
I will buy the the cable and other needed items.

The Z has Comfort Access and here is what it does already:
Doors lock via ridges on door handles
Doors unlock when near car and pull up on the door handle
The Hardtop will now open and close with the FOB and windows as well.

From all the other owners out there here is what I would love to code the Z for:
- add folding mirrors when car is shut off.
- Doors unlock automatically when you turn off the engine
- Windows open close with FOB when the roof is up
- Opening doors will not interrupt auto window up
- turn on the torque and power meter for your video screen
- Turn signal from 3 time to 5
- Transfer iPhone ringtones to car
- DVD-in-motion
- Turn off 90 seconds of dinging when a seatbelt is not fastened.
- Turn off the warning on your GPS screen when you start the car
- Tires show temp and psi under vehicle status.

Any other items recommended would be appreciated.
Thanx in advance.

Well, welcome aboard.

I am afraid though if you have downloaded the manuals from this forum, then what you have downloaded is all for Fxx Chassis Coding using E-Sys, PSdZData, and an ENET Interface cable. Exx Chassis coding though, including your E89 Z4, requires NCS Expert, SP-Daten, and a K+DCAN Interface Cable. Unfortunately, there are not many Exx Coders around here, and no documentation. It is online in other forums though like E90Post if you Google it.