BimmerFest BMW Forum banner

Coding help please........

2K views 4 replies 4 participants last post by  Beltane 
#1 ·
Hi short story i when to indy shop to get scan cause seat belt and airbag warning light on
and here the code that he found

2F6C Exhaust fumeflap, input signal error
test conditions have been completed timeout

29E1 Fuel mixtuer control 2
test conditions have been completed timeout

29E0 Fuel mixtuer control
test conditions have been completed timeout

2A2C fuel mixtuer control 2
test conditions have not been completed short
circut or signal interruption

93B2 ZK10/ Security battery clamp error
test conditions have been completed.

And he said the thing that might cost the airbag
warning light could be 93B2 battery clamp i went to google to look for the
problem but blank in the air if anyone could guide me how to look and even
better if you could post the picture too. thank advance

Second, what are the mixture control and mixture control 2 is that difficult to changed.

thank you for you all help
 
See less See more
#3 ·
None of those faults have anything to do with the airbag system.

It looks like he only scanned th DME or engine module.

The passenger mat sensor is not part of the recall campaign that is currently running
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top