BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 167 Results
  1. E46 (1999 - 2006)
    Hi. Bought my first e46 in March (Love it) and then found a clutch issue. Looks like a warped flywheel. Kuni BMW Portland wants $5,100 for the clutch work. I about puked when I heard this. Recommendations for Clutch service in Oregon? I'm in Corvallis. I'm willing to drive for e46 experience...
  2. E36 (1991 - 1999)
    So I have a 98 323is. Last week my throw out bearing died and I spent the weekend installing my new clutch+flywheel plus a new pilot and throwout bearing. Finishing up we were having trouble getting the car into gear. I ended up getting a new slave cylinder to see if it solved the issue. I drove...
  3. E36 (1991 - 1999)
    I have been working on a 1999 323ic that was absolutely destroyed by the previous owner. After rebuilding the head and changing a blown head gasket, I moved on to the non-working clutch. The first issue I encountered was a broken master cylinder that was missing the hook to attach to the clutch...
  4. E39 (1997 - 2003)
    Hi. First post here. I have an E39 530D 1999 with manual gearbox. The problem i’m having is that the car is acting like it’s a bad clutch. I bought the car about a month ago and apparently the clutch is new. When i’m accelerating slow, the car is normal. When i do it fast, the car revs up from...
  5. UK
    Hi there, hoping someone can help identify this as I keep coming up short. I got a 1 series 116d 2010 model. When I bought it, it had this slight clicking noise when the clutch is fully depressed and again when released, seems to dissappear in 3rd gear but the sound may just be muffled. I've...
  6. General BMW Questions
    This one might be a bit dumb but I’m pretty new to all this stuff and trying to learn, I have a 98 328i I recently put in the FX stage 2 clutch and did the rear main seal (along with other things not rly important to this I don’t think) but I’m getting some pretty bad shutter from it and I’m...
  7. E90/E91/E92/E93 (2006 - 2013)
    IGNORE THIS POST So i just started experiencing this today: When i’m about to fully decompress the clutch, i feel a feedback on the brake pedal and gas pedal, as if someone tapped the bottom of my shoe. The car runs fine like nothing is broken just that weird tap on the pedals I will say i do...
  8. E82 / E87 / E88 / F20 1 Series (2008 - 2014)
    Attempting to get the clutch housing off but the torx bolts are causing a problem. T40 have a slight wiggle and will round off the bolt (already slipped on one just using a wrench), T45 are too big. Anyone know the correct size or another method to remove them? Not sure if it's the original...
  9. E39 (1997 - 2003)
    Ive been looking into swapping the clutch on my drift car. 2000 528i I want to get rid of the dual mass and throw a more solid clutch into it for drifting but don’t know what brand to go with. I have options but not many. I’ve been leaning towards Sachs clutch kit with ecs flywheel but also saw...
  10. F30 / F31 / F32 / F33 / F34 / F36 (2012 - current)
    This is on a 2014 BMW 328 with manual transmission. The drivetrain malfunction warning came on and the code read as 1D3101 or "Clutch , plausibility, transmittable torque too low, clutch damaged". I was not convinced that the clutch was faulty when the malfunction warning came on the first time...
  11. E90/E91/E92/E93 (2006 - 2013)
    Hello all, Bought a 2011 320D ED couple months ago. When I bought it, the gear stick was shakey (more than usual) which is a sign of a bad dual mass flywheel. It was driving okay till yesterday. After doing a harder acceleration in first gear to join the roundabout, the car now sometimes is...
  12. X3 M, X5 M, X6 M, Z3 M & Z4 M
    Hi all. Currently restoring my father-in-law’s M Roadster. Long story short I have taken out the slave cylinder to be replaced and upon reinstalling and preparing to bleed the line, the clutch is dead to the floor. I can bring it up with my foot it will stay in place but the second I go to...
  13. E60 / E61 (2004 - 2010)
    Hey, i have recently replaced the o-ring in the clutch slave cylinder in my E61 525i ssg. After getting the slave cylinder back into the car i filled up the hydraulic system, bled the system with inpa before starting the gear adaption/clutch biting point procedure. In the end of the...
  14. E46 (1999 - 2006)
    Hello. Im new to the forum. I have a strange noise, when I press the clutch the noise disappears, and when I put my feet on the clutch pedal, the pedal shakes and hits. I went to the master said it was 100% flywheel. Replace the flywheel kit with a sedate (LUK), but the knocking is still...
  15. E90/E91/E92/E93 (2006 - 2013)
    I have a E90 2007 3.0L 328i. I am trying to find out if the following parts fit my car or not: Clutch Disc - Part Number: "323 0637 10" Clutch Pressure Plate - Part Number: "123 0472 10" Both are made by LuK, and the part numbers I wrote are printed on the respective parts. I am trying to find...
  16. E90/E91/E92/E93 (2006 - 2013)
    The noise I'm having is a ticking noise coming from under the car. My mechanic is 93% positive its the throw-out bearing. When my foot is off the clutch, there is the ticking noise. It seems random because I cant hear it all the time, sometimes its quiet, mostly when the car is cold. but once...
  17. E60 / E61 (2004 - 2010)
    Hello, fellow BMW-enthusiasts! I recently purchased a used BMW e61 525d. When I came home I suddenly heard a strange noise when I pushed the clutch pedal in (I'll leave a video for reference). As you probably can see in the video footage when I push the pedal in it makes a strange noise and rpm...
  18. E46 (1999 - 2006)
    Hey guys, I work at a Volvo dealership and was thinking (due to Covid slowing us down) there’s lots of spare time for our techs (one who is quite capable of installing an e46 clutch) to install a clutch kit on my 2006 325CI M Sport. Now at 200,000 klms, I’m starting to feel a pulsation in the...
  19. E46 (1999 - 2006)
    Hey guys, I have a 2003 325xi 5-speed, 173k miles, and after pulling it into the garage for a valve cover gasket replacement and exhaust inspection, I went to pull it back out of the garage and now it won’t move in any gear. There has been no indication of clutch slippage and has been shifting...
  20. Performance
    As title states, brand new in box SPEC Stage 2 SB532-2 Clutch kit. Never been opened or looked at. Still in the box with the FCPEURO tape seal. It goes for $790 shipped from FCP. I'll let it go for $500 because I'm motivated to get money back for it. Bought for a 2008 335xi. Should fit most...
1-20 of 167 Results
Top