BimmerFest BMW Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 41 Results
  1. E90/E91/E92/E93 (2006 - 2013)
    I’m going to replace my vanos units. I know I have to lock the cams to DTC but I’m not sure if I really have to lock the flywheel too. I seen some videos saying you don’t really need to but not sure. Any ideas?
  2. E90/E91/E92/E93 (2006 - 2013)
    Hello all, Bought a 2011 320D ED couple months ago. When I bought it, the gear stick was shakey (more than usual) which is a sign of a bad dual mass flywheel. It was driving okay till yesterday. After doing a harder acceleration in first gear to join the roundabout, the car now sometimes is...
  3. E46 (1999 - 2006)
    Hello. Im new to the forum. I have a strange noise, when I press the clutch the noise disappears, and when I put my feet on the clutch pedal, the pedal shakes and hits. I went to the master said it was 100% flywheel. Replace the flywheel kit with a sedate (LUK), but the knocking is still...
  4. E90/E91/E92/E93 (2006 - 2013)
    Gear shifter vibrates at lower rpm. Around 900rpm. Dark vibrating noice from gear box area. Is this a bad flywheel? Hopefully someone here can help me. N47.
  5. E90/E91/E92/E93 (2006 - 2013)
    Hello, I am planning to change the flywheel for my E90 3.0 MT 328i 2007 and was wondering what other models of 328i use the same flywheel in case I find a used flywheel in good condition. The following site: BMW Flywheel 21207573785 - Luk 4150389100 | eEuroparts.com® says that Luk DMf082, which...
  6. E90/E91/E92/E93 (2006 - 2013)
    2 weeks ago my cars Flywheel failed and created the worst noise I've ever heard coming from a car. The RAC recovered me home and they put it down to a Flywheel issue, I put it on axle stands, ordered a new Clutch and DMF Kit and fit it over the weekend. When the cars Flywheel originally failed...
  7. E39 M5 (1998-2003)
    So it's finally time to replace my clutch on my 2003 525i at 160,000 miles I might add! I got one estimate and it includes the flywheel. It shows: Clutch kit - $379 Flywheel - $1132 Crankshaft Seal kit - $142 And labor - $950 Other sundry parts and fees with a total cost of $2972. For today's...
  8. E36 (1991 - 1999)
    So picked up a Stage 2 FX clutch from Gripforce with LTW flywheel. Dont care for opinions on it. Im posting this to clear it up so nobody has to deal with this nightmare in the future. I have ONE VERY SIMPLE QUESTION. THERE IS ONE SIMPLE ANSWER. Which way does the clutch disk go in the setup...
  9. X5 E70 (2007 - 2013)
    Hello Everyone, I have what it seems like an oil leak near the flywheel. can you help isolate the root cause? is it because of an oil pan or the shaft seal. see picture;
  10. F10 / F11 (2011 - 2016)
    Hi, Im Brad, I am new here and wondered if I could use your expert knowledge if possible I have a 2013 530d manual 258bhp and need a replacement flywheel however am ultra Confused at which part number I need I was told by one BMW dealer the m57 engine flywheels fit the n57 however another one...
  11. X5 E53 (1999 - 2006)
    Hello all, I am new here on the forum, but not so new when it comes to BMW. I have drove euros all my life, typically trashers turned to gold. Anyways. I just got into an X5 that needed a motor, got a known good one with just under 100k on it. Since doing the swap I am now getting the p0011...
  12. E36 (1991 - 1999)
    hi i have a 323 with opgraded gearbox to a zf, but now my cluth is done so now i am loking for a clucth and a singlemass flywheel that can hold to drift and racing. how many hp ca the stock clucth take :dunno: is it a good idea to just opgrade to a m3 clucth :dunno: i have looked at these...
  13. X3 E83 (2004 - 2010)
    Well my 2004 X3 started making this noise when I'd start up my car and then I realized the engine rattle would go away when I pressed the clutch in. It got worse three weeks ago and I was forced the take it to a mechanic. He said it was my throw out bearing so he replaced that, the pressure...
  14. E90/E91/E92/E93 (2006 - 2013)
    Hi all, So I was taking my e92 320d M Sport for a nice spirited Sunday drive down some country lanes earlier today when I noticed a clinking/whining/grinding noise in 6th gear, I was doing around 60 at the time and it seemed to be speed dependant as to how loud it got. Once I realised that the...
  15. E90/E91/E92/E93 (2006 - 2013)
    I will try and keep this short I appreciate anyone's time to assist with the situation, basically a drive train sensor went off on the vehicle . Dealer tells me clutch is worn and I have to pay for replacement. I have been driving manual for 30 years and my drive to work is 33km all highway, the...
  16. E39 (1997 - 2003)
    I'll be replacing the clutch in my 540i soon so I've been looking at flywheel options. I came across this single mass steel flywheel by TTV http://ttvracing.com/product/bmw-m62-b44-lite/?referrer=product-listing&iframe=true&width=80%&height=100%&type=flywheels&engine=bmw-m62&manufacturer=bmw I...
  17. E30 (1982 - 1993)
    Working on my '88 e30, replacing throw out, clutch, master and slave cylinders, seals, etc, etc. When I removed my flywheel the pilot bearing just fell out; no felt pad, no dust cover...just the bearing. I anticipated pulling the bearing would be a PITA and to have it just fall out seemed like...
  18. E60 / E61 (2004 - 2010)
    Hi Guys, New user here!! Be gentle!!! I bought my bimma in Jan and within a week I had a clutch judder issue, that the dealer has been ignoring me about up until about a week ago! Finally, after 3 weeks this last time the car being at the dealer again, they are still saying their technicians...
  19. X3 E83 (2004 - 2010)
    Our X3 was the subject of a recall action by BMW for replacement of the distribution chain. We have performed this action with a BMW garage, but after 150 kilometers, we had a break of the dual mass flywheels. The same BMW garage explained that the cause was not related to the intervention made...
  20. E28 (1982 - 1988)
    I did some damage to the friction surface of my flywheel with a worn out clutch, and it needs to be replaced. I so far have had no luck finding an OE one as they have been discontinued, can anyone point me in the direction of a cheap aftermarket one, potentially of the lightweight aluminum...
1-20 of 41 Results
Top