Bimmerfest - BMW Forums - Conversation Between doru and poolman

Go Back   Bimmerfest - BMW Forums > doru

Conversation Between doru and poolman
Showing Visitor Messages 1 to 2 of 2
  1. poolman
    04-06-2014 10:11 AM
    Hi Doru- Getting ready to tackle the ball joint DIY. If possible,,would you measure the inside diameter's of the ball joint tool that you use to do the procedure with. I have quiet a collection of Volvo tools of the same type as the one that you have,,but would like to make sure that I have something ready of make somthing ready before jumping in for this work.
  2. poolman
    08-02-2013 12:11 PM
    Hey Doru--Just thought I'd drop a line--back a few weeks ago you were posting about the clunk coming from the front of your car and couldn't figure what was happening. I had the same thing going on and thought mine was coming from the front also--It turned out to be the rear subframe bushings in my car were shot--I changed them about 2 weeks ago and all is well now--but for the life of me I thought the problem was from the front of the car--this problem fooled me--just thought you might be interested in my findings
    Chip (poolman)Roberson

All times are GMT -7. The time now is 11:29 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
© 2001- VerticalScope Inc. All rights reserved.