Bimmerfest - BMW Forums

Bimmerfest - BMW Forums (
-   X5 E70 (2007 - 2013) (
-   -   E70 self leveling suspension coding issues. (

Dgeorge1617 12-22-2019 12:39 PM

E70 self leveling suspension coding issues.
I recently purchased my 2008 BMW X5 3.0Si an i love it. However, i purchased it with the air suspension deleted and a set of coilovers installed on all four corners. The coilovers ride nice and are adjustable but as expected the "Self leveling suspension Malfunction" code is on the dash. I was looking at how to remove the code and purchased a k+DCAN cable as well as downloaded INPA/NCS EXPERT and all the BMW tools software.

Here is my problem: When i try to delete the $220 code in the VO/FA and hit "back" it gives me the COAPI-1000/Fehler message. In reading some threads I see that I am supposed to also remove $2VA along with the 220 but I do not have this code in my VO.

As a workaround I used NCS Expert/NCS Dummy to read the KOMBI and disable the EHC app module and disconnected the EHC module. This workaround failed as well because when I execute SG-CODIEREN to code KOMBI the car automatically sets the EHC App Module back to "aktiv". Any ideas why the coding is not staying or as to why I cannot delete the 220 from the VO?

Any help would be greatly appreciated. Also if you need more info I would be glad to provide.

ard 12-22-2019 03:47 PM

there is a coding sub-forum, post there as well....


Dgeorge1617 12-22-2019 04:22 PM


Originally Posted by ard (Post 13196563)
there is a coding sub-forum, post there as well....


Thanks Ill post in there.

All times are GMT -7. The time now is 01:54 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
© 2001- VerticalScope Inc. All rights reserved.